Cam Lift, Duration and LCA

[cinquecento]

Does anyone know the Cam Lift, Duration and LCA on a cam used in a standard 96 Serp 500?

Would a cam with 450" lift on the inlet & 474" on the exhaust fit?

Many thanks

[steve-V8s]

It may be difficult to determine what the “standard cam” was although I have been told a kent 218 was often used. If you go to the Kent Cams web site and type in 218 it will give you the data you need.

[rev-erend]

Hope this is some use :

http://www.btinternet.com/~jon.wolfe/kentcamdata.h...

or get or the dial guage on yours..