sealing the head light baskets
sealing the head light baskets
Author
Discussion

San Diego GTR

Original Poster:

469 posts

236 months

Tuesday 30th September 2008
quotequote all
I've got some dirt and dust that has accumulated in the head light basket. There must not be a great seal with the basket and the dust is getting into the area and is visible from the outside. What have you done to seal this up?
Thanks
Paul

Steve_D

13,802 posts

287 months

Tuesday 30th September 2008
quotequote all
Can't say I have looked very hard but 14,000 miles and 4 years I am not having that problem.
Have you got foam sealing strip around where the headlight cover meets the underside of the clip?

Steve

San Diego GTR

Original Poster:

469 posts

236 months

Tuesday 30th September 2008
quotequote all
No, but now I know what that foam was for that I got in the kit that is still sitting on the shelf. Hahahaha. Thanks Steve!
Paul

LuckyP

6,243 posts

254 months

Tuesday 30th September 2008
quotequote all
I though that open cell foam was there to provide the headlamps with a constant water source should the air inside be a little too dry to create the right level of condensation furious

CanAm Dave

939 posts

253 months

Tuesday 30th September 2008
quotequote all
LuckyP said:
I though that open cell foam was there to provide the headlamps with a constant water source should the air inside be a little too dry to create the right level of condensation furious
I left a small gap at the bottom of the foam seal and have no condensation issues at all.

Regards Dave

LuckyP

6,243 posts

254 months

Tuesday 30th September 2008
quotequote all
CanAm Dave said:
LuckyP said:
I though that open cell foam was there to provide the headlamps with a constant water source should the air inside be a little too dry to create the right level of condensation furious
I left a small gap at the bottom of the foam seal and have no condensation issues at all.

Regards Dave
Perhaps that is where I am going wrong - do you do many miles in the wet though?

robm3

4,930 posts

256 months

Tuesday 7th October 2008
quotequote all
I always thought the sealed in headlights are a pain, mine condense reguarly plus have some dirt in. Lotus and others have the right answer in that they countersink two bolts/screws to hold their perspex covers in place. Have a look at an Elise next time you see one, it's quite a neat job.