cluchless changes
Discussion
right, i have been hearing about these so called cluchless changes on bike ans wondered what they are all about.
i tryed one yesterday, but all it did was, yes it changed gear up, but it also jolted the bike forward quite a bit, now i dont know if it is ment to do that or not, or that you only do it when you are giving it some.
can someone shed some light on them??
i tryed one yesterday, but all it did was, yes it changed gear up, but it also jolted the bike forward quite a bit, now i dont know if it is ment to do that or not, or that you only do it when you are giving it some.
can someone shed some light on them??
You only need to roll it off a little as you change gear then roll back on 
Here a simple guide http://www.datacraftsystems.co.uk/techniques/techn...
Once you get a nice smooth change it won't harm the gearbox.

Here a simple guide http://www.datacraftsystems.co.uk/techniques/techn...
Once you get a nice smooth change it won't harm the gearbox.
www.datacraftsystems.co.uk/techniques/techniques_l...
That's a good web site
Incidentally, does anyone notice differences doing clutchless changes on different makes of bike (Ducatis, BMWs, etc)? I find it much, much easier to do clutchless changes on a Japanese four, compared to a boxer twin.
That's a good web site

Incidentally, does anyone notice differences doing clutchless changes on different makes of bike (Ducatis, BMWs, etc)? I find it much, much easier to do clutchless changes on a Japanese four, compared to a boxer twin.
SVS said:
Incidentally, does anyone notice differences doing clutchless changes on different makes of bike (Ducatis, BMWs, etc)? I find it much, much easier to do clutchless changes on a Japanese four, compared to a boxer twin.
i have to do them on stroppy, its the only way to get 3rd on the way up the box - i think its the clunk from the drivetrain that knocks it into gear.Both My Suzuki bikes did almost instant smooth clutchless gear changes.
Slight pressure under lever, minimal back off throttle and streight back on, that was it I was in the next gear.
It was smooth when going mental or just chilling. On the Honda I was not able to get on the gas as violently afterwoods as I was on the GSXRs' so it does seem to be bike dependant. the GSXRs were a dream to do it. for some reason I enjoy a good clucthless gear change
IMO its better for the box and probably engine that using the clutch
Slight pressure under lever, minimal back off throttle and streight back on, that was it I was in the next gear.
It was smooth when going mental or just chilling. On the Honda I was not able to get on the gas as violently afterwoods as I was on the GSXRs' so it does seem to be bike dependant. the GSXRs were a dream to do it. for some reason I enjoy a good clucthless gear change
IMO its better for the box and probably engine that using the clutch
steveo29 said:
cool, will try and perfect them on my cbr 
are upchanges the same as down, just give a bit of pressure on the peg and when you throttle off it will change?
no, only use clucthless going up through the gears. Clutch on way down for road use I would say because its not usualy a smooth change and O don't think it does your box a lot of good.
are upchanges the same as down, just give a bit of pressure on the peg and when you throttle off it will change?
Edited by Pesty on Saturday 4th October 20:19
Momentofmadness said:
You only need to roll it off a little as you change gear then roll back on 
Here a simple guide http://www.datacraftsystems.co.uk/techniques/techn...
Once you get a nice smooth change it won't harm the gearbox.
hmm I diagree with that. the kicking of the lever part.
Here a simple guide http://www.datacraftsystems.co.uk/techniques/techn...
Once you get a nice smooth change it won't harm the gearbox.
Just light pressure under the lever and when you back off the gas the gyroscopic forces or whatever do the work for you. no need to kick anything.
could also go from 1st to 2nd easily on the GSXR's
Pesty said:
steveo29 said:
cool, will try and perfect them on my cbr 
are upchanges the same as down, just give a bit of pressure on the peg and when you throttle off it will change?
no, only use clucthless going up through the gears. Clutch on way down for road use I would say because its not usualy a smooth change and O don't think it does your box a lot of good.
are upchanges the same as down, just give a bit of pressure on the peg and when you throttle off it will change?
Edited by Pesty on Saturday 4th October 20:19
Clutchless down is a big no-no unless you can perfectly match the revs, which is pretty damn difficult on a bike on the road, what with all the other distractions around you.
For anyone interested, look here: http://auto.howstuffworks.com/sequential-gearbox1.... and have a look at how the dog engagement works on a proper manual sequential box (none of your flappy paddle auto boxes here!).
My GSXR is a beaut to do clutchless changes, both up & down and basically, it maintains drive/engine braking to the rear, so doesn't upset the balance like a clutched change can. I always blip to match revs on the downchanges.
I think on a bike with a slipper clutch, it's pointless as there's no advantage and only a higher risk of locking the rear.
There is a massive differences between bike make and models IMO.
As said by Pesty, Suzuki gearboxes are the sweetest stock.
I think on a bike with a slipper clutch, it's pointless as there's no advantage and only a higher risk of locking the rear.
There is a massive differences between bike make and models IMO.
As said by Pesty, Suzuki gearboxes are the sweetest stock.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff





