respraying fairing/rest of bike
Discussion
right, as some of you will know i am going to be picking up a rather mint NSR125 at the weekend, and although i like the colour scheme, i would like to respray a CERTAIN part of the body work, namly.
its black all over with a sort of silver V shape on the fairings, so i want to spray it a different colour.
now what im wondering is, would i just tape over the bits i dont want a different colour and spray away or sand down the bit i want to spray a little so the paint will stick to it better and line up better?
i have no experiance with bike respraying but otherthings i do have experiance.
any help mucho appresiated
its black all over with a sort of silver V shape on the fairings, so i want to spray it a different colour.
now what im wondering is, would i just tape over the bits i dont want a different colour and spray away or sand down the bit i want to spray a little so the paint will stick to it better and line up better?
i have no experiance with bike respraying but otherthings i do have experiance.
any help mucho appresiated
You need to get some wet and dry and lightly key the surface so that the paint will stick to the fairing.It is best to use some fine wet and dry so that the surface is not scratched to badly.It may be worth first giving it a coat of plastic primer then giving it the coat of colour.
If you are going to mask of certain areas you will end up with a hard edge where the paint line is left after you have removed the masking tape.
If you are going to mask of certain areas you will end up with a hard edge where the paint line is left after you have removed the masking tape.
TPS said:
You need to get some wet and dry and lightly key the surface so that the paint will stick to the fairing.It is best to use some fine wet and dry so that the surface is not scratched to badly.It may be worth first giving it a coat of plastic primer then giving it the coat of colour.
If you are going to mask of certain areas you will end up with a hard edge where the paint line is left after you have removed the masking tape.
hmmm..... might just have to leave it as its a 125 and its going to be an ass and save if for a 'proper' bike If you are going to mask of certain areas you will end up with a hard edge where the paint line is left after you have removed the masking tape.

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


