Discussion
I am going to be getting a 2 stroke bike by the end of the week, now i have heard of bad reliablility issues with the RS125 but have heard that the NSR125 is pretty good for reliablility.
just trying to find out any tips and things to look out for that will go pop or break causing for a full/parcial rebuild apart from keep the 2 stroke oil topped up??
it being a honda i would think that its pretty good on the issue at hand but still is a 2 stroke so some issues will be there.
just trying to find out any tips and things to look out for that will go pop or break causing for a full/parcial rebuild apart from keep the 2 stroke oil topped up??
it being a honda i would think that its pretty good on the issue at hand but still is a 2 stroke so some issues will be there.
regular checks on the plug as well.
if the plug is black, wet and oily, it's running too rich and will not perform properly
If its the opposite, ride with your hand hovering over the clutch as there is a good chance it will nip up.
2 strokes, by nature, do need rebuilding from time to time, but regular checks on oil, water and plug condition should keep this at bay for a longer period.
PS - although it's great fun to rev the balls of them, it doesn't help the lifespan.
if the plug is black, wet and oily, it's running too rich and will not perform properly
If its the opposite, ride with your hand hovering over the clutch as there is a good chance it will nip up.
2 strokes, by nature, do need rebuilding from time to time, but regular checks on oil, water and plug condition should keep this at bay for a longer period.
PS - although it's great fun to rev the balls of them, it doesn't help the lifespan.
I did a weeks touring of Wales, as a teenager, on my RD125LC. It coped fine and didn't need rebuilding once...
Don't remove the oil pump, they're very reliable, and far easier than premixing your own oil every tank refill. Give it decent quality two stroke oil, always let it warm up before thrashing it, don't be tempted to go for a flat out run (asking for trouble), just ride it hard and enjoy it. As for revving them, its recommended imho, otherwise you'll just clog it up and fill the pipe with unburnt two stroke oil and have to de-coke it every other month. Strokers live on revs, they love it, scream the thing everywhere! Rebuilds are cheap and easy to do anyway, I've done them in half a day (once you've got the parts of course).
NSRs were always the posh 125s when I were a lad, most of us had TZR/RD/DT. They can all take huge abuse so don't worry unduly.
I miss my old strokers (can you tell?), had quite a few, culiminating in the RGV250. Superb fun.
Don't remove the oil pump, they're very reliable, and far easier than premixing your own oil every tank refill. Give it decent quality two stroke oil, always let it warm up before thrashing it, don't be tempted to go for a flat out run (asking for trouble), just ride it hard and enjoy it. As for revving them, its recommended imho, otherwise you'll just clog it up and fill the pipe with unburnt two stroke oil and have to de-coke it every other month. Strokers live on revs, they love it, scream the thing everywhere! Rebuilds are cheap and easy to do anyway, I've done them in half a day (once you've got the parts of course).
NSRs were always the posh 125s when I were a lad, most of us had TZR/RD/DT. They can all take huge abuse so don't worry unduly.
I miss my old strokers (can you tell?), had quite a few, culiminating in the RGV250. Superb fun.

EvoBarry said:
I did a weeks touring of Wales, as a teenager, on my RD125LC. It coped fine and didn't need rebuilding once...
Don't remove the oil pump, they're very reliable, and far easier than premixing your own oil every tank refill. Give it decent quality two stroke oil, always let it warm up before thrashing it, don't be tempted to go for a flat out run (asking for trouble), just ride it hard and enjoy it. As for revving them, its recommended imho, otherwise you'll just clog it up and fill the pipe with unburnt two stroke oil and have to de-coke it every other month. Strokers live on revs, they love it, scream the thing everywhere! Rebuilds are cheap and easy to do anyway, I've done them in half a day (once you've got the parts of course).
NSRs were always the posh 125s when I were a lad, most of us had TZR/RD/DT. They can all take huge abuse so don't worry unduly.
I miss my old strokers (can you tell?), had quite a few, culiminating in the RGV250. Superb fun.
the pump may be good when youngDon't remove the oil pump, they're very reliable, and far easier than premixing your own oil every tank refill. Give it decent quality two stroke oil, always let it warm up before thrashing it, don't be tempted to go for a flat out run (asking for trouble), just ride it hard and enjoy it. As for revving them, its recommended imho, otherwise you'll just clog it up and fill the pipe with unburnt two stroke oil and have to de-coke it every other month. Strokers live on revs, they love it, scream the thing everywhere! Rebuilds are cheap and easy to do anyway, I've done them in half a day (once you've got the parts of course).
NSRs were always the posh 125s when I were a lad, most of us had TZR/RD/DT. They can all take huge abuse so don't worry unduly.
I miss my old strokers (can you tell?), had quite a few, culiminating in the RGV250. Superb fun.

but my pump is 30 years old and it goes
the engine blows
so do you feel lucky punk
Run on decent oil! warm it up nicely make sure its nice and warm before you get it to higher revs. they can be very tempremental if you don't warm them up, my mates is a nail now, mines still going strong(touch wood!!!!!!!!)
More than anythingyou don't really need a rebuild, it's usually just the piston, you can tell when that's gone, you have a flat spot towards the end of the rev range, it's still useable put not too maximum performance, or for long afterwards. happened to me twice, engine is still good touch wood! <can never sa that enough with a derbi
More than anythingyou don't really need a rebuild, it's usually just the piston, you can tell when that's gone, you have a flat spot towards the end of the rev range, it's still useable put not too maximum performance, or for long afterwards. happened to me twice, engine is still good touch wood! <can never sa that enough with a derbi

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



Its very very reliable if thats any help? 
