2003 Hornet headlight bulb
2003 Hornet headlight bulb
Author
Discussion

Sossige

Original Poster:

3,176 posts

294 months

Tuesday 7th October 2008
quotequote all
Hi all -

I've got a Honda CB600F3 and I'd like to change the headlight bulbs to a better Philips bulb.

As I have an F3 Hornet, the headlamp bulbs aren't a standard H4 fitment - the bike needs 2 x 55w bulbs, one for low beam and one for high beam. Unfortunately Mr Haynes doesn't tell me what fitment the replacements should be rolleyes

I believe that they would be H7 fitment but I'm not 100% certain and don't want to take the headlight rim off until I have the replacement bulbs ready.

Am I right in thinking that they are H7 fitment? Can anyone confirm that for me?

Thanks,

Soss

Edited by Sossige on Tuesday 7th October 19:38

black-k1

12,817 posts

260 months

Tuesday 7th October 2008
quotequote all
Your owners handbook will say what the bulb is.

Once you know, swap the dip beam for an HID unit. thumbup

Sossige

Original Poster:

3,176 posts

294 months

Tuesday 7th October 2008
quotequote all
black-k1 said:
Your owners handbook will say what the bulb is.
Thanks bud, but unfortunately it says the same as Mr Haynes - 12 volt 55 watt - nothing else frown

S

davidn

1,028 posts

290 months

Tuesday 7th October 2008
quotequote all
I'm in the same boat as you (Honda). I fitted a HID kit over the weekend and now wanted to upgade the main beams. The only info I can find is what you have 2 x 55w 12v. Did a lot of hunting around and I'm pretty sure they're H7. I'll get round to fitting them tomorrow and will post back if they're the right ones.
David

Sossige

Original Poster:

3,176 posts

294 months

Tuesday 7th October 2008
quotequote all
davidn said:
I'm in the same boat as you (Honda). I fitted a HID kit over the weekend and now wanted to upgade the main beams. The only info I can find is what you have 2 x 55w 12v. Did a lot of hunting around and I'm pretty sure they're H7. I'll get round to fitting them tomorrow and will post back if they're the right ones.
David
Thanks David, much appreciated smile

Soss

davidn

1,028 posts

290 months

Thursday 9th October 2008
quotequote all
Right, had a go at replacing the main beams today with the kit I got from Ebay listed for 954 Fireblade. Well I must have a dodgy one 'cos they don't fit. The original bulbs don't have an H marking, just 'STANLEY' & SN911-01200. The kit contains 2 x H7 55w. Firt off the back plate of the bulb is too thin so the spring clip retainer doesn't hold the bulb in firmly so it wobbles about. Second, the terminal block on the loom is too wide for the spades on the back of the bulb. So I don't think it's an H7 fitment.

Had the same problem with the thickness of the bulb back plate with the HID kit but made up a natty spacer to pad it out. Can't be bothered with these ones though so back to the drawing board. Bugger.

David

Sossige

Original Poster:

3,176 posts

294 months

Thursday 9th October 2008
quotequote all
Hi David -

Hmmm, interesting. I spoke to my local Honda dealer today who assured me that I need an H7 fitment - so as a result I've ordered some of the Philips Extreme H7 bulbs from powerbulbs.com - I hope that they turn out to be right!

I'll let you know how I get on wink

Soss

davidn

1,028 posts

290 months

Thursday 9th October 2008
quotequote all
Alright Soss, be good to hear how you get on. What does H7 refer to then, is it the fitment or the type of bulb?
This is getting complicated.
David

Hooli

32,278 posts

231 months

Thursday 9th October 2008
quotequote all
H7 is the shape & fitment of the blub, along with the output pattern it produces - therefore anyones H7 blub will work in anyones H7 reflector etc etc

whoever got one of the blubs out, dont suspose you took a pic did ya? wander around a car shop & compare it - or google away & i'd expect to find something.

black-k1

12,817 posts

260 months

Thursday 9th October 2008
quotequote all
a "standard" H7 bulb can be seen here:

http://www.micksgarage.ie/Audi-A4-Nov-2000-Oct-200...

davidn

1,028 posts

290 months

Friday 10th October 2008
quotequote all
Here you go Soss, just to confuse us even more, pics.

Original Honda 'Stanley' on the left, Ebay spacial & box on right. Look at the spades and the thickness of the retaining plate. The fitment tab on the bulb is oaky bt that's about it.

The spades were the same as original on HID bulb I fitted also marked as H7.

Wonder if the black plastic back plate on the original is mean't to come off?

Confusing eh?

Right, edit for being an idiot, the back plate is removable! So how many Estate Agents does it take to change a light bulb? Well not me that's for sure.
David

Edited by davidn on Friday 10th October 11:52

Sossige

Original Poster:

3,176 posts

294 months

Friday 10th October 2008
quotequote all
hehe

Nice one bud, hopefully the new bulbs are a worthwhile improvement...

I've gone for the Philips Extreme bulbs after recommendation on here in another thread and their performance in an Auto Express group test....

Soss

davidn

1,028 posts

290 months

Friday 10th October 2008
quotequote all
No idea what they are mate, there's not one bit of English on the box!, next question's gonna be how to do you replace the wiring loom on a Honda?
Phillips one's are sposed to be good I heard.
David

black-k1

12,817 posts

260 months

Friday 10th October 2008
quotequote all
davidn said:
Here you go Soss, just to confuse us even more, pics.

Original Honda 'Stanley' on the left, Ebay spacial & box on right. Look at the spades and the thickness of the retaining plate. The fitment tab on the bulb is oaky bt that's about it.

The spades were the same as original on HID bulb I fitted also marked as H7.

Wonder if the black plastic back plate on the original is mean't to come off?

Confusing eh?

Right, edit for being an idiot, the back plate is removable! So how many Estate Agents does it take to change a light bulb? Well not me that's for sure.
David
Doh!

At least you now know how it works. HID kit anyone???

Sossige

Original Poster:

3,176 posts

294 months

Friday 10th October 2008
quotequote all
censored

Powerbulbs emailed me earlier to say that my new bulbs are on their way - so I thought I'd remove the headlamp bowl and get it ready to fit the new bulbs.

Total censored - the bulbs are only H11 fitment, not H7 at all (thanks Mr Honda dealer!) so I've wasted £30 on the wrong bulbs.

frown

Soss

davidn

1,028 posts

290 months

Friday 10th October 2008
quotequote all
Typical, you'd never get this sort of caper with an 848! wink
David

Sossige

Original Poster:

3,176 posts

294 months

Friday 10th October 2008
quotequote all
davidn said:
Typical, you'd never get this sort of caper with an 848! wink
David
LOL - you'd know for sure what fitment you need as you'd be replacing them every 5 minutes smile