CBR600F needs replacement downpipes
Discussion
Guys
Long face from my son who has a CBR600 circa 1998 model with blown exhaust manifold somewhere underneath - presumably where it meets the tailpipe. He has been quoted £240 + VAT + fitting by the local independent dealer which seems a bit steep as E-Bay has some pipes circa £110.
Is it an easy job to replace ( Haynes gives it a 2 spanners rating - so I think I qualify ). I presume rusted nuts on studs is the usual problem but will start to panic if these are seized into the head.
At least he can use my CBF to commute on while his bike is in bits.
Can anybody offer any tips ?
Thanks in anticipation
BryanC
Long face from my son who has a CBR600 circa 1998 model with blown exhaust manifold somewhere underneath - presumably where it meets the tailpipe. He has been quoted £240 + VAT + fitting by the local independent dealer which seems a bit steep as E-Bay has some pipes circa £110.
Is it an easy job to replace ( Haynes gives it a 2 spanners rating - so I think I qualify ). I presume rusted nuts on studs is the usual problem but will start to panic if these are seized into the head.
At least he can use my CBF to commute on while his bike is in bits.
Can anybody offer any tips ?
Thanks in anticipation
BryanC
I changed the downpipes on an old kawsaki gpz1100-e1 and I imagine it'll be more or less the same. The main risk as you point out is that the nuts are seized. One of mine wound out the stud but soaking it in penetrating oil and putting a couple of lock nuts on the other end shifted it and cleaned up it was fine. Worst case is obviously snapping the stud though I guess. The only way to find out is to either try or pay someone else to do it unfortunately. You could buy the pipes off ebay and get someone to fit them having removed the bodywork but can't imagine you'd save much and you'd still have to pay them to remove the stud if the worst came to the worst.
You could always spray some penetrating oil on the nuts and leave over night and see if they come off ok and then make a decision. If you do break one and the rest do up you'd still be able to ride it to the shop although it would blow a bit probably.
You could always spray some penetrating oil on the nuts and leave over night and see if they come off ok and then make a decision. If you do break one and the rest do up you'd still be able to ride it to the shop although it would blow a bit probably.
Edited by dern on Wednesday 8th October 23:52
I changed the downpipes on my 2002 CBR600F - studs came out OK but I think it had been changed recently (I was changing one set of aftermarket stainless pipes for another, long story). Actually 4 of the studs/nuts had been replaced with an allen key bolt, oddly.
I think a 98 would be the model just before mine (99/00 is similar bike to mine but carb version). Definitely studs snapping is going to be your concern, I should think the rest of it will be easy in comparison.
If it's anything like the set up on my bike you'll need to disconnect the radiator from its mountings, but not necessarily completely disconnect it (i.e. drain coolant, etc).
Also - downpipes for £110? Are they stainless? It's about £180-200 for aftermarket stainless versions, usually. Change it to those so you don't have this trouble again
I think a 98 would be the model just before mine (99/00 is similar bike to mine but carb version). Definitely studs snapping is going to be your concern, I should think the rest of it will be easy in comparison.
If it's anything like the set up on my bike you'll need to disconnect the radiator from its mountings, but not necessarily completely disconnect it (i.e. drain coolant, etc).
Also - downpipes for £110? Are they stainless? It's about £180-200 for aftermarket stainless versions, usually. Change it to those so you don't have this trouble again

Thanks guys - what a great forum to get advice. 6 - 7 minutes before the first reply is fantastic!
His bike has lasted 4 years since Direct Access, cost him £3.5K and has an MOT until next July(ish), a good service history etc. and now has about 30K miles on the clock. Its generally sound but used every day means it is an eveyday commuter bike and not the showpiece bikes you see on shiny days only.
In the background was the decision to consider getting rid for silly money. possibly for track use, and purchase of a friends 650V-strom for circa £2.4K with 9000mls and SORNed since 2005 but the sensible head says do the exhaust job, use the CBR as a hack over the winter and think about another bike in the Spring.
The Haynes suggests its nuts on studs but I've yet to check. I think the plan is to remove fairings, partially remove the rad ( I hadn't spotted that )a week of soaking with PlusGas penetrating fluid, and then a socket attack. I like the idea of an impact driver, and I have even wondered if a nut splitter might be useful tool with new nuts on assembly.
Anyhow - his wifes French cousin coming over this weekend and my birthday next week allows me time to collect the parts, have a good exploratory look to size the job up and then go for it. I'll let you know how we get on.
Thanks again,
BryanC
His bike has lasted 4 years since Direct Access, cost him £3.5K and has an MOT until next July(ish), a good service history etc. and now has about 30K miles on the clock. Its generally sound but used every day means it is an eveyday commuter bike and not the showpiece bikes you see on shiny days only.
In the background was the decision to consider getting rid for silly money. possibly for track use, and purchase of a friends 650V-strom for circa £2.4K with 9000mls and SORNed since 2005 but the sensible head says do the exhaust job, use the CBR as a hack over the winter and think about another bike in the Spring.
The Haynes suggests its nuts on studs but I've yet to check. I think the plan is to remove fairings, partially remove the rad ( I hadn't spotted that )a week of soaking with PlusGas penetrating fluid, and then a socket attack. I like the idea of an impact driver, and I have even wondered if a nut splitter might be useful tool with new nuts on assembly.
Anyhow - his wifes French cousin coming over this weekend and my birthday next week allows me time to collect the parts, have a good exploratory look to size the job up and then go for it. I'll let you know how we get on.
Thanks again,
BryanC
One bit of (hopefully) helpful advice if you do replace them yourself.
We've done most of the possible problems you'll come across when removing the old ones (apart from the possibility of the head actually cracking as the stud tries to undo itself! - been there, done that!)
When you try to put it back together, you have to hold four exhaust gaskets in place, then allign the manifold, slide up the clamps and get the washers and nuts on - all at the same time.
Unless you are "octopus man" you don't have enough limbs to do this!
Coat one side of all the exhaust gaskets in grease and "stick" them into the head so that they don't keep on falling out as you reassemble everything. A bit of a smell of burning grease for a few miles afterwards, but it saves hours of scrambling around trying to pich up gaskets that fall out at just the wrong moment.
Re-torque the bolts after 50 miles (but you would do this anyway).
Dave
We've done most of the possible problems you'll come across when removing the old ones (apart from the possibility of the head actually cracking as the stud tries to undo itself! - been there, done that!)
When you try to put it back together, you have to hold four exhaust gaskets in place, then allign the manifold, slide up the clamps and get the washers and nuts on - all at the same time.
Unless you are "octopus man" you don't have enough limbs to do this!
Coat one side of all the exhaust gaskets in grease and "stick" them into the head so that they don't keep on falling out as you reassemble everything. A bit of a smell of burning grease for a few miles afterwards, but it saves hours of scrambling around trying to pich up gaskets that fall out at just the wrong moment.
Re-torque the bolts after 50 miles (but you would do this anyway).
Dave
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff







, I await your next thread - 'Can you tell me the best way to remove broken studs'