Identify this brake caliper!
Identify this brake caliper!
Author
Discussion

RemaL

Original Poster:

25,103 posts

265 months

Thursday 9th October 2008
quotequote all
For a Friend of mine:









info I can provide:
[quote]It's apparently from a Honda but I don't know which one, I got told it's a front brake caliper but it looks like a rear caliper to me and the reason I need to find out which it is, is because I need to find another identical one for someone with no internet access.
The colour is blue hammerite cos the guy "liked it"
[/quote]

ANy idea's/ thought the PH Bikers might be able to help

bimsb6

8,812 posts

252 months

Thursday 9th October 2008
quotequote all
looks like rear to me poss cbr600 fj/k/l ? what part number are the pads ?

Hooli

32,278 posts

231 months

Thursday 9th October 2008
quotequote all
if thats a front i'd guess its a small bike to be single piston. you could try getting the numbers off those EBC pads & googling them for fitments i guess.

castrolcraig

18,073 posts

237 months

Thursday 9th October 2008
quotequote all
nissin rear caliper thats for sure...

Chilli

17,320 posts

267 months

Thursday 9th October 2008
quotequote all
A blue one?

RemaL

Original Poster:

25,103 posts

265 months

Thursday 9th October 2008
quotequote all
will report back with more info when I pass this on. part number if I can. also its Blue as I posted as he liked the colour. not not normally blue

Buelligan 984

186 posts

234 months

Thursday 9th October 2008
quotequote all
It looks to me like the bleed nipple has sheared. A common enough problem.

IIRC, Earl's do a banjo bolt with a bleed nipple built into the top of it.

Bleeding the brakes with these can be a pain, because the nipple has to be at the very top of the caliper (I used to take the caliper off the fork leg, put it over a spare brake disk and bleed it that way before fitting it back to the fork) but its a lot cheaper than a new caliper or drilling / retapping etc.

Dave

Steve_T

6,356 posts

303 months

Thursday 9th October 2008
quotequote all
Take the pad out and work out what caliper by matching the pad up in an EBC catalogue perhaps?

Benni

3,726 posts

242 months

Friday 10th October 2008
quotequote all
Maybe a little far fetched, but :

doesn´t the "3diamonds" logo cast in the caliper point in the Mitsubishi direction,

and therefore to the mitsui group, who owned/distributed Yamaha for some time ?

These single-pot brake calipers were even used on front brakes in the 70s and 80s,

together with a drum at the rear.

HTH, Benni

TallPaul

1,524 posts

289 months

Saturday 11th October 2008
quotequote all
Benni said:
....These single-pot brake calipers were even used on front brakes in the 70s and 80s,
...
They look similar, but they were opposed piston, not sliding caliper types.

Yoda954

2,260 posts

279 months

Saturday 11th October 2008
quotequote all
It looks very much like the rear caliper I had on my FZ750 ('D' reg)...except that was factory painted gold.

RemaL

Original Poster:

25,103 posts

265 months

Sunday 12th October 2008
quotequote all
right sorted so I'm told.

DT125 LC 1996 and is a front caliper

many thanks for the help and guidance