has any one had any experience with washer fluid bags?
Discussion
Im looking at using the below on my ultima and figured you guys had prob had experience with them.
http://www.partsworldperformance.com/product_detai...
Are they easy to use and fit?
Ivan
http://www.partsworldperformance.com/product_detai...
Are they easy to use and fit?
Ivan
My Elan is fitted with one (they all were).
Easy enough to fit - you simply need to find a convenient bulkhead to hang it off. It hangs from the two eyelets at the top of the bag, from suitable hooks or toggles, electric pump is wired up to your washer switch and tubing connects to your washer nozzles - simple!
Easy enough to fit - you simply need to find a convenient bulkhead to hang it off. It hangs from the two eyelets at the top of the bag, from suitable hooks or toggles, electric pump is wired up to your washer switch and tubing connects to your washer nozzles - simple!

The ad. states approx 1 litre and SVA requirement says minimum 1 litre so you need to be sure it will hold a litre as the SVA man may want you to prove it.
Steve
ETA Why not go for the rigid one further down on that link?
Holds 1.25L and is a few quid cheaper.
Steve
ETA Why not go for the rigid one further down on that link?
Holds 1.25L and is a few quid cheaper.
Edited by Steve_D on Friday 10th October 12:40
CorseChris said:
Had one on the Westfield for 18 years - never any trouble. Only 1 issue I can think of.....if it's located somewhere tight and you need to wedge an arm past it to get at something...it'll wee all over you 
Ive got one in my westfeild.
- Its a 1991 se, so pre SVA, but it seams to work (the washer bottle).
Daniel
Gassing Station | Kit Cars | Top of Page | What's New | My Stuff


