Speaker sizes

[Duke Thrust]

I know it's been covered before but the search isn't turning up any answers…

What sizes are the speakers? 4 inch rear, 6.5 inch front?

[cupra20v.t]

would like to know the sizes too and how to remove etc.

[WorAl]

from memory im sure the rears are bigger than 4", I wont have the car back for a couple of weeks though so won't be able to check any time soon.

[Duke Thrust]

Just ordered a set from Carl Baker, will let you know the sizes when they arrive.

[volospian]

That would be vey useful, cheers!

[cupra20v.t]

how much and what brand where the ones off Carl if you dont me asking. message it to me if you wouldnt like to post it up.

[Duke Thrust]

cupra20v.t said:

how much and what brand where the ones off Carl if you dont me asking. message it to me if you wouldnt like to post it up.

I went for Quart MB - Carl did me a good deal so probably best that you speak to him, not nearly as expensive as I would have thought. Carl: 0772 072 3407

[Robscim]

A bit cheeky, but you never know...

I managed to lose the cover off the driver's side front speaker a couple of months ago (it was already slightly dented so wasn't the best fit) and as I rarely listen to the stereo (I use the external stereo most of the time) I am reluctant to pay to fit new speakers when I only need a cover.

So.... I wondered if anyone was fitting new speakers and was about to bin the speaker cover (Pioneer, original fit in 1999) that I could steal for a few beer tokens?

On the other hand, if you want to tell me to b*gger off and stop being such a cheapskate, I won't be offended, really!!

Cheers

Rob

[Duke Thrust]

Robscim said:

A bit cheeky, but you never know...

I managed to lose the cover off the driver's side front speaker a couple of months ago (it was already slightly dented so wasn't the best fit) and as I rarely listen to the stereo (I use the external stereo most of the time) I am reluctant to pay to fit new speakers when I only need a cover.

So.... I wondered if anyone was fitting new speakers and was about to bin the speaker cover (Pioneer, original fit in 1999) that I could steal for a few beer tokens?

On the other hand, if you want to tell me to b*gger off and stop being such a cheapskate, I won't be offended, really!!

Cheers

Rob

You're welcome to mine

[Robscim]

Duke,

That would be great (assuming they're the same or similar!!).

I'll try to PM you, if I can get this IT stuff to work!!

Cheers

Rob

[Robscim]

Duke,

Huge thanks for the speaker covers - they were waiting for me when I returned home at the weekend. That's beer I owe you

What a fantastic community the Cerbera world is!!

Now, I've just got to work out what holds the cover on!! Anyone any ideas?

Cheers

Rob

[Dave 500]

just bend it out of shape very very slightly and whack it on.

[Robscim]

How's that for a speedy response!! In fact, "A cerbera response"

Thanks - I'll give it a go but was reluctant to get the Brummie screwdriver out (I'm allowed to say that as I grew up there!).

Cheers

Rob