Parts

[D1ckie]

Where is the best place for Cerbera parts, all the little small things.

Now I need the small plastic bonnet rod retainer / hook that secures the bonnet rod in place when not open.

Also, I've looked everywhere for a comprehensive list of parts, anyone know of any?

Thanks

[Gazzab]

Clevor Trevor
Racing Green

[brogenville]

Gazzab said:

Clevor Trevor
Racing Green

+
Race Tech Direct (www.racetechdirect.co.uk)
+
TVR Car parts (www.tvrcarparts.com)
+
TVR Power Parts Website (www.powerstores.co.uk)

and for upgrades;

Track Car Solutions (www.trackcarsolutions.net)
+
ACT (www.actproducts.co.uk)

Have a look at the alternative parts sticky thread

Edited by brogenville on Tuesday 14th October 15:21

[Duke Thrust]

D1ckie said:

Now I need the small plastic bonnet rod retainer / hook that secures the bonnet rod in place when not open.



Thanks

Let me know if you find one of those, need one too

[Gazzab]

When I lost mine andy at APM fitted a metal one.

[greenm]

Hi guys just happen to be a dinghy sailor and there is such a little plastic item that holds small rods with an open jaw exactly the same try and find a shop that sells dinghy parts or check on line i i wll try and get a link for you

[greenm]

Try this link as an example

http://www.seamarknunn.com/acatalog/SpringClips.ht...

There are many more and different sizes and will tend to be a little stronger than the ones I certainly have on mine. You may just need to wrap some electrical tape around the pole to make it fat enough were it will clip on. Suggest fix it with 5 min epoxy?

[itsallyellow]

With regards to these small items allways send me an email. I have most things spare.

Must have one of those bonnet things somewhere! Will have a look.

Mike

[cupra20v.t]

i need the bonnet rod as mine was missing when i had the car. Itsayellow have you got a spare fella? if not how much do they go for? if they are silly money then i may make my own stainless one and thread the ends so i can but the ball sockets on them

[itsallyellow]

The bonnet stay? Or the one that locates it?

Mike

[cupra20v.t]

bonnet stay fella, but don't worry i have just ordered one from steve heath engineering, quite a reasonable price too £14.99. cheers steve

[caduceus]

Another here for RaceTech. Good value and friendly service. Got alot of my parts there.