Throttle blip on a down shift?
Discussion
I do this but as a newbie have struggled with a few things....
Under fairly heavy braking I struggle to blip the throttle and continue to smoothly apply the brake. I guess I'll get smoother with practice.
Down Changing is so much smoother I find it harder to 'read' what gear I'm in. So I find myself counting rather than doing it instinctively.
Also coming to a slow stop approaching junctions I get the feeling traffic in front think I'm pressuring them into moving off by blipping the throttle.
Any tips for a newbie?
Under fairly heavy braking I struggle to blip the throttle and continue to smoothly apply the brake. I guess I'll get smoother with practice.
Down Changing is so much smoother I find it harder to 'read' what gear I'm in. So I find myself counting rather than doing it instinctively.
Also coming to a slow stop approaching junctions I get the feeling traffic in front think I'm pressuring them into moving off by blipping the throttle.
Any tips for a newbie?
Funny thing, that - I was really rusty getting back into geared bikes this 'summer' but after the initial 'remember' rides had nailed it into my head that the left lever was NOT a rear brake and grabbing it coming up to a corner was NOT useful
- even though I'm no riding god I just immediately 'clicked' with blipping on downshifts. Seems all those years of doing it in cars just ingrains the habit, even though the actual muscle-memory movements are *very* different.
Just seems natural to blip the engine revs to match gearbox speed on a down-change, minimises lurching and makes everything much smoother. I currently ride a 4-cyl sportsbike but that's going to change to a single thumper next year - I guess matching revs on downshifts is more important for avoiding rear-wheel-lockup in big twins and singles than the 4-cyl bikes...
Interestingly, because of the controls, it's trivially easy to do on a bike compared to a car, where the controls have to be advantageously located w.r.t. your foot size / ankle flexibility. Throttle response on a bike is much faster than most cars due to lack of flywheel-effect, which makes it even easier to do - with some cars with throttle-by-wire and massive lags before pickup, you have to prod the throttle a second or so before you want the revs to rise, making 'heel-n-toe' a matter of guesswork - on a bike you can exactly meter out the revs during your gearchange. The closer ratios in most bike 'boxes make it even easier, so yeah I reckon it should be pretty much standard practice for all riders... any reason why you wouldn't do it? Clutch drag as a means of slowing down the bike isn't as helpful on a bike as normal engine braking, right?
- even though I'm no riding god I just immediately 'clicked' with blipping on downshifts. Seems all those years of doing it in cars just ingrains the habit, even though the actual muscle-memory movements are *very* different.Just seems natural to blip the engine revs to match gearbox speed on a down-change, minimises lurching and makes everything much smoother. I currently ride a 4-cyl sportsbike but that's going to change to a single thumper next year - I guess matching revs on downshifts is more important for avoiding rear-wheel-lockup in big twins and singles than the 4-cyl bikes...
Interestingly, because of the controls, it's trivially easy to do on a bike compared to a car, where the controls have to be advantageously located w.r.t. your foot size / ankle flexibility. Throttle response on a bike is much faster than most cars due to lack of flywheel-effect, which makes it even easier to do - with some cars with throttle-by-wire and massive lags before pickup, you have to prod the throttle a second or so before you want the revs to rise, making 'heel-n-toe' a matter of guesswork - on a bike you can exactly meter out the revs during your gearchange. The closer ratios in most bike 'boxes make it even easier, so yeah I reckon it should be pretty much standard practice for all riders... any reason why you wouldn't do it? Clutch drag as a means of slowing down the bike isn't as helpful on a bike as normal engine braking, right?
Know what, I'm actually a pretty good rider. Trackdays, I rarely get overtaken in the inters group, and should really be in the top group. Backing it into corners, most things scraping the ground, leaving lines exiting the corners.....but can I successfully "blip"? Nope! I always end up shooting forward!!
wiliferus said:
Being reasonably new to the biking community I'm still trying to get it right, not too far off. Must admit when you get it right its slightly arousing... 
Another noobie, who was thinking of asking this question.
I do it (and heel and toe the car) normally, but I cannot do it while braking on the bike. Infact I dont even know where to begin with that. I guess I need to start braking with just a couple of fingers too.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff





