Scrubbing In Rubber
Author
Discussion

wiliferus

Original Poster:

4,225 posts

229 months

Friday 24th October 2008
quotequote all
Quick bit of advice please gents, and ladies of course

Getting a new tyre on the back of my Thundercat on Tuesday as it bald as a bald thing. I have only had the bike a few weeks and it came like that.

On the front is a perfectly good Battlax 020, so i'm getting a new 021 on the back. What do i need to be careful of with regards scrubbing it in, especially with regards riding in the rain which is very likely for my first ride on the fresh rubber! yikes

I've only been riding for a month BTW so please resist the urge to tell me to get my balls out and get my knee down! smokin

untruth

2,834 posts

220 months

Friday 24th October 2008
quotequote all
Try and avoid taking it in the rain for a first ride if I were you!

B1G GK

1,379 posts

236 months

Friday 24th October 2008
quotequote all
untruth said:
Try and avoid taking it in the rain for a first ride if I were you!
Agree with that,
Wait for a dry day, about March then,
I tend to just have a bimble for about 50 mile.

Hooli

32,278 posts

231 months

Friday 24th October 2008
quotequote all
see how shiney it looks. the last time i got a bridgestone it was so shiney i could nearly see reflections. bloody lethal it was as i threw the bike down the road...sandpapered the tyre so it didnt shine & then it was fine.

basicly ride like its soaking wet & cold on a dry day & you'll be ok. it takes a few heat cycles for the releasing agent to work out the rubber so the tyre works properly. oh its the releasing agent you can see shining on the tyre btw.

Rach*

8,824 posts

247 months

Saturday 25th October 2008
quotequote all
B1G GK said:
untruth said:
Try and avoid taking it in the rain for a first ride if I were you!
Agree with that,
Wait for a dry day, about March then,
I tend to just have a bimble for about 50 mile.
When I got a new rear on the CBR I was told to take it easy between 50 and 150 miles by all my well meaning buddies, so I did about 100 miles easy then started to pick him up again.



still have 1/4 inch untouched, bugger frown

untruth

2,834 posts

220 months

Saturday 25th October 2008
quotequote all
I've got a lot more than that untouched! I like my bike sunny side up too much!

RizzoTheRat

29,170 posts

223 months

Saturday 25th October 2008
quotequote all
Hooli said:
basicly ride like its soaking wet & cold on a dry day
You won't go far wrong with that bit of advice thumbup

If you ride sensibly you won't have a problem. The main reason people get in trouble is they forget it's a new tyre and whack the throttle open to soon. When you've been out for a ride take a lok at the tyre and you'll easily see how well it's scrubbed in as some of it will be nice and matt black and sticky, while the edges will still be shiny.

Edited by RizzoTheRat on Saturday 25th October 08:51

RemaL

25,103 posts

265 months

Saturday 25th October 2008
quotequote all
riding in the wet on new tyres as said does not help when srubbing in tyres. takes much longer. I found when I had BT016's fitted to the triple 2 months ago I was gental for the first 20 miles then when I got over to wales where I was taking the bike to scrub them in. I managed to use all of the rear tyre but it was Hot and very dry.

So really when srubbing tyres in the main thing to think about is the condition of the road and weather. and don't push it to quickly

evo stu

224 posts

222 months

Saturday 25th October 2008
quotequote all
do a rolling burnout as you leave the tyre centre wink

gets some heatin the tyre and scrubs it in nicely

Sossige

3,176 posts

294 months

Saturday 25th October 2008
quotequote all
RizzoTheRat said:
Hooli said:
basicly ride like its soaking wet & cold on a dry day
You won't go far wrong with that bit of advice thumbup
That's the advice I was given by the tyre fitters when I had my new BT16s fitted - ride like it's wet for the first 100 miles and only count DRY miles in that 100.

I rode my Hornet in the wet after only covering 40 dry miles on the new tyres -not as scary as I thought it might be. Take it easy and you will be fine.

S

Hooli

32,278 posts

231 months

Saturday 25th October 2008
quotequote all
last pair of tyres i got i rode home in the wet. oddly enough they felt fine but looking at them i suspect the shop had washed/sanded/done something to remove the worst of the releasing agent before fitting. which is rather nice & makes me think i'll go back (along with the decent price).

catso

16,587 posts

298 months

Saturday 25th October 2008
quotequote all
Hooli said:
last pair of tyres i got i rode home in the wet. oddly enough they felt fine but looking at them i suspect the shop had washed/sanded/done something to remove the worst of the releasing agent before fitting. which is rather nice & makes me think i'll go back (along with the decent price).
Maybe they weren't new..........

Hooli

32,278 posts

231 months

Saturday 25th October 2008
quotequote all
so thats why they are pre-flat spotted in the middle hehe
they had a scuffed sorta look, rather like they'd been gone over with a brillo pad or something.

Chilli

17,320 posts

267 months

Saturday 25th October 2008
quotequote all
evo stu said:
do a rolling burnout as you leave the tyre centre wink

gets some heatin the tyre and scrubs it in nicely
Love it! In first, 8-10k, front brake on and let go of the clutch. Hold it there for 5 seconds or so , flip the visor down, wave good bye to the tyres fitters, and let go of the brake.......



let me know this goes for ya!