94 chim for under 4k

[400+bhp]

have the chance to pos get a 400 has most stamped book needs a couple of things rear wheel bearings i think as a sound per wheel rotation. chassis looks ok and gen good for a 94 also a ticking from around manifold.. any suggestions or basic advice very welcome had a 97 and a 99 prev but not gone that old b4 so not aware of poss nightmares but have not seen any chims for around 3750 what you recon chaps... dare i do it oh dear help!!

[Red Cabbage]

Ouch! Is it me or does that hurt?

[Al 450]

That's cheap. Ticking manifold will be the manifold gaskets, very common. Expect a bill for about £200 - £250...

[That Daddy]

Al 450 said:

That's cheap. Ticking manifold will be the manifold gaskets, very common. Expect a bill for about £200 - £250...

That must be a desperate seller

[400+bhp]

how involved is the wheel bearings and cost wise thanks all

[Chassis 33]

Wheel bearings aren't that big a deal, a couple of hours a side assuming you have a big breaker bar and scaffold pipe for the axle nut (they are handed, IIRC N/S is a left hand thread), other than that its not complicated. Exhaust manifold gaskets aren't expensive, just really annoying and fiddly to change.

Regards
Iain