Heated grips?
Author
Discussion

anonymous-user

Original Poster:

85 months

Wednesday 29th October 2008
quotequote all
Hi, pretty new to the forum.

Had a few bikes now and have just bought a red and white 2006 r6 v v nice smile few extras air filter akrapovic etc etc

i fancy some heated grips, do any of you have any and could reccommend me some decent ones that are easy to fit because its to cold to be fiddling around on my driveway lol

cheers

sprinter885

11,550 posts

258 months

Wednesday 29th October 2008
quotequote all
Hi. You might find some of the comments on previous thread useful.
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

anonymous-user

Original Poster:

85 months

Wednesday 29th October 2008
quotequote all
sprinter885 said:
Hi. You might find some of the comments on previous thread useful.
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
thanks, search facility was not working when i posted the thread.

Mr Gear

9,416 posts

221 months

Wednesday 29th October 2008
quotequote all
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.

StevRS

443 posts

240 months

Wednesday 29th October 2008
quotequote all
I have just purcased some bar muffs from ebay - not keen on messing with the (currently working) electrics on the Geep...

dern

14,055 posts

310 months

Wednesday 29th October 2008
quotequote all
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.

black-k1

12,817 posts

260 months

Wednesday 29th October 2008
quotequote all
dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.
Although, wiring them up so that they only work when the ignition is on is very easy. All you need is a relay (which the grips may already come with) where you have a fused feed direct from the battery and a switching feed from any circuit that goes live when the ignition is on.

dern

14,055 posts

310 months

Wednesday 29th October 2008
quotequote all
black-k1 said:
dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.
Although, wiring them up so that they only work when the ignition is on is very easy. All you need is a relay (which the grips may already come with) where you have a fused feed direct from the battery and a switching feed from any circuit that goes live when the ignition is on.
Admitedly true. Sadly the oxford heated grips don't come with a relay frown

black-k1

12,817 posts

260 months

Wednesday 29th October 2008
quotequote all
dern said:
black-k1 said:
dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.
Although, wiring them up so that they only work when the ignition is on is very easy. All you need is a relay (which the grips may already come with) where you have a fused feed direct from the battery and a switching feed from any circuit that goes live when the ignition is on.
Admitedly true. Sadly the oxford heated grips don't come with a relay frown
Available cheaply from the likes of Hal-frauds.

dern

14,055 posts

310 months

Wednesday 29th October 2008
quotequote all
black-k1 said:
Available cheaply from the likes of Hal-frauds.
holds-hands-up... lazy wink

sprinter885

11,550 posts

258 months

Wednesday 29th October 2008
quotequote all
I'm thinking about warm hands too -so pardon my lack of electrical know-how- do you need a specific type of relay to do that or are all the same then ?

black-k1

12,817 posts

260 months

Wednesday 29th October 2008
quotequote all
sprinter885 said:
I'm thinking about warm hands too -so pardon my lack of electrical know-how- do you need a specific type of relay to do that or are all the same then ?
This sort of thing would be more than fine:

http://www.in-car-stuff.com/shop/relay-spco-p-59.h...

I think that heated grips are normally rated at less than 20watts each thus total current will be less than 4 amps so a 30 amp relay is total overkill.

For those that don't know, you can easily convert electrical power (watts) to current (amps). If you know the power then divide it by 12 (as bikes have a 12 volt system) to get the current so a total of 40 watts will need 40/12=3.33 amps. Likewise, if you multiply amps by 12, you get watts so 30 amps gives 30*12=3600 watts. Make sure your cables, switches, relays etc. are rated at a higher ampage than the number you get and you will be fine.

Stig

11,823 posts

315 months

Wednesday 29th October 2008
quotequote all
black-k1 said:
dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.
Although, wiring them up so that they only work when the ignition is on is very easy. All you need is a relay (which the grips may already come with) where you have a fused feed direct from the battery and a switching feed from any circuit that goes live when the ignition is on.
Yup - which is what I did with mine. Nice toasty fingers this morning despite the snow and ice!! Bar muffs make them about 300000000% more efficient too.

Andy OH

1,961 posts

281 months

Wednesday 29th October 2008
quotequote all
kevr6 said:
Hi, pretty new to the forum.

Had a few bikes now and have just bought a red and white 2006 r6 v v nice smile few extras air filter akrapovic etc etc

i fancy some heated grips, do any of you have any and could reccommend me some decent ones that are easy to fit because its to cold to be fiddling around on my driveway lol

cheers
I've got official Yamaha heated grips fitted to my 2005 R1, I use the bike all year round, 52,000 miles currently in 3.5 years and mainly commuting. You are given a years warranty with them, but they are not cheap at £250 fitted. They are thermostatically controlled and turn off with the ignition as they are wired that way. They are very good and would have them fitted to another bike when I change.

Hyperion

16,952 posts

231 months

Wednesday 29th October 2008
quotequote all
The problem with heated grips, is that during the winter you wear thicker gloves which the heat can't penetrate. You're hands still freeze over the knuckles & finger tips and they become pointless. If you fit bar muffs however, you can wear thinner gloves, have toasty hands and no wind chill to take away the heat cloud9

Roger McLittriss

493 posts

285 months

Wednesday 29th October 2008
quotequote all
black-k1 said:
Likewise, if you multiply amps by 12, you get watts so 30 amps gives 30*12=3600 watts.
Not according to my calculator wink

RizzoTheRat

29,172 posts

223 months

Wednesday 29th October 2008
quotequote all
black-k1 said:
I think that heated grips are normally rated at less than 20watts each thus total current will be less than 4 amps so a 30 amp relay is total overkill.
Yeah but if you bung in a 30 amp one you've got a nice switched supply available when you decide you want to add a satnav, bike to bike radio, accessory socket, heated jacket, etc.

black-k1

12,817 posts

260 months

Wednesday 29th October 2008
quotequote all
Roger McLittriss said:
black-k1 said:
Likewise, if you multiply amps by 12, you get watts so 30 amps gives 30*12=3600 watts.
Not according to my calculator wink
Ok! Ok! Maths actually is one of my stronger points. Unfortunately, typing isn't!!

Hooli

32,278 posts

231 months

Wednesday 29th October 2008
quotequote all
black-k1 said:
I think that heated grips are normally rated at less than 20watts each thus total current will be less than 4 amps so a 30 amp relay is total overkill.
yup, the oxford grips for example come with a 5amp fuse & state max current draw of 4amps on the box.

Andy OH

1,961 posts

281 months

Thursday 30th October 2008
quotequote all
Hyperion said:
The problem with heated grips, is that during the winter you wear thicker gloves which the heat can't penetrate. You're hands still freeze over the knuckles & finger tips and they become pointless. If you fit bar muffs however, you can wear thinner gloves, have toasty hands and no wind chill to take away the heat cloud9
Not necessarily true that you have to wear thicker gloves with heated grips.

I wear summer waterproof gloves and thermal inner gloves and my finger tips for the last few days have been fine, the temperatures have been around 1 degree when I have left home in the morning and about 2 -3 degrees on the way home. You do not need thick gloves if you have heated grips, decent goretex waterproof summer gloves and thermal inner gloves. Believe me I have tried everything and this is the best combination.