washing salt off a bike
washing salt off a bike
Author
Discussion

mojitomax

Original Poster:

1,876 posts

223 months

Friday 31st October 2008
quotequote all
the weather's closing in and the gritters have been out salinating the roads. by pride and joy ends up coming home looking like it's covered in dandruff. Lots of people advocate rinsing the bike after a ride to get rid of the salt. for the past coupe of days, after coming home, i've been rinsing the bike down immediately with cold water. Obviously, pouring cold water onto hot engine parts produces lots of steam and creaking from the metal as it cools down. I appreciate that this is probably what would happen if the bike was ridden through a puddle anyway, however, i was wondering if hosing the bike down whilst it's still hot would do any damage to the engine/exhaust as it rapidly cools. Any risk of warping etc? confused

I gave my bike a good wash and a generous coating of ACF50 before the weather closed in so it should be water and corrosion proof anyway, but it has been particularly salty over the past few days.

vrod

961 posts

221 months

Friday 31st October 2008
quotequote all
I would always wait until its cool before washing it down. Its not just the rapid cooling on the engine casing that not good for the motor finish but as the water initially evaporates when the engine is hot, the impurities in the water get baked on.
When dry, you can find white crysals forming on the engine case that once build up can be really difficult to remove.
My advise would be keep it well lubricated, bodywork waxed, wash it when 'cooled down' (not cold). In the summer use something like S100 engine cleaner and it will bring it back like new.
Ride carefull.