Gutted, my Vertigos have scratched my bike
Discussion
I'm one of those people who really loves taking care of their vehicles - I enjoy cleaning my bike as much as I do riding it!
I'm a bit upset that my otherwise mint Hornet has been scratched by my Sidi Vertigos - the rear screw that holds part of the boot together (circled in the pic below):

It's scratched the bike on the right hand side foot peg hanger - I guess it would be a rearset on a supersports bike. I've obviously, at some point, had my boot really close to the hanger and the screw has scratched the paintwork.
I'm in two minds as what to do - I bought the bike to get experience on, not get attached to - but my otherwise mint bike (all be it 5 years old!) is now not mint.
I'm more concerned about it happening again - although I guess with my future bike I will likely have rearsets and can you replace them easily if you want - on the Hornet the rider/pillion pegs are attached to one long hanger, not easily replaceable.
Has anyone else had Vertigos damage their rearsets/hangers like this?
Soss
I'm a bit upset that my otherwise mint Hornet has been scratched by my Sidi Vertigos - the rear screw that holds part of the boot together (circled in the pic below):
It's scratched the bike on the right hand side foot peg hanger - I guess it would be a rearset on a supersports bike. I've obviously, at some point, had my boot really close to the hanger and the screw has scratched the paintwork.
I'm in two minds as what to do - I bought the bike to get experience on, not get attached to - but my otherwise mint bike (all be it 5 years old!) is now not mint.
I'm more concerned about it happening again - although I guess with my future bike I will likely have rearsets and can you replace them easily if you want - on the Hornet the rider/pillion pegs are attached to one long hanger, not easily replaceable.
Has anyone else had Vertigos damage their rearsets/hangers like this?
Soss
Thought about editing my original post, but decided against it in case the same thing happens to someone else.
Just roped wifey into looking at the bike with me and she reckons it isn't the screw at all that has rubbed against the hanger - but the plastic "heel" attached to the back of the Vertigos. Looks like over time, they have rubbed against the paint whilst I've been using the rear brake pedal and also the gear lever - but the problem is worse for the rear brake as I've obviously been using that more.
I think the design of the Vertigos with the design of the Hornet hasn't helped. On a super sports, I can imagine it isn't a problem - but because the rider/pillion footpegs are fixed to one "hanger arm", it is a problem on the Hornet.
Oh well, I bought the Hornet to get experience and learn on - I'm certainly doing that. With hindsight, perhaps Sidi Vertigos aren't the best choice for the Hornet
Soss
Just roped wifey into looking at the bike with me and she reckons it isn't the screw at all that has rubbed against the hanger - but the plastic "heel" attached to the back of the Vertigos. Looks like over time, they have rubbed against the paint whilst I've been using the rear brake pedal and also the gear lever - but the problem is worse for the rear brake as I've obviously been using that more.
I think the design of the Vertigos with the design of the Hornet hasn't helped. On a super sports, I can imagine it isn't a problem - but because the rider/pillion footpegs are fixed to one "hanger arm", it is a problem on the Hornet.
Oh well, I bought the Hornet to get experience and learn on - I'm certainly doing that. With hindsight, perhaps Sidi Vertigos aren't the best choice for the Hornet

Soss
Edited by Sossige on Sunday 2nd November 23:48
y2blade - yep, I did look at the boots before buying them but I bought them when I was starting to learn to ride; didn't have my Hornet then. In any case, they are a comfortable boot, it's just a shame that the hangers on the Hornet come away from the frame, meaning it's even more likely that a boot can rub against the paintwork.
Stu R - at first I assumed that it was the screw; seemed a reasonable assumption to make. I'm pretty sure that it wasn't the screw - as you say, it's recessed and when I positioned the boot on my footpegs to see what was likely to touch the hangers, the plastic heel plate was the more obvious part.
Maybe I will try a different brand of boot in the future - a shame as the Sidis are really comfortable and offer good "feel". As my next bike will probably be a supersports with rearsets, hopefully it will be less of an issue.
S
Stu R - at first I assumed that it was the screw; seemed a reasonable assumption to make. I'm pretty sure that it wasn't the screw - as you say, it's recessed and when I positioned the boot on my footpegs to see what was likely to touch the hangers, the plastic heel plate was the more obvious part.
Maybe I will try a different brand of boot in the future - a shame as the Sidis are really comfortable and offer good "feel". As my next bike will probably be a supersports with rearsets, hopefully it will be less of an issue.
S
Edited by Sossige on Monday 3rd November 00:00
To be honest, I've found every boot has it's compromises.
I love Sidi, I've tried just about every boot out there and nothing has come close to them for comfort. I just wish the durability was better on the pair i bought (I've got Vertigo Corsa Air).
I've also got a pair of puma 1000's which I thought were ace but turned out to be utter tripe, and a pair of Alpine Supertech R's, neither have seen the light of day since I bought them and the A*'s have split at the seams.
The only boot I hold higher than Sidi's are Daytonas which although they look rubbish and aren't as comfortable as the sidis to walk around in, I reckon are the best boots money can buy.
I'm going to get onto Sidi, or at least the place I bought them from about my boots tomorrow, 6 months old give or take and they're dropping to bits and look shagged (being black and white doesn't help that I suppose), so we'll see how their customer service fairs tomorrow anyway.
Anywhoo I'm blithering on, I wouldn't be too worried about the Sidi's, they're ace boots and for all I've had a few probs with mine i wouldnt hesitate to recommend them, as I've said on here my mate's covered 30-40k miles in a pair and they're still going strong.
I love Sidi, I've tried just about every boot out there and nothing has come close to them for comfort. I just wish the durability was better on the pair i bought (I've got Vertigo Corsa Air).
I've also got a pair of puma 1000's which I thought were ace but turned out to be utter tripe, and a pair of Alpine Supertech R's, neither have seen the light of day since I bought them and the A*'s have split at the seams.
The only boot I hold higher than Sidi's are Daytonas which although they look rubbish and aren't as comfortable as the sidis to walk around in, I reckon are the best boots money can buy.
I'm going to get onto Sidi, or at least the place I bought them from about my boots tomorrow, 6 months old give or take and they're dropping to bits and look shagged (being black and white doesn't help that I suppose), so we'll see how their customer service fairs tomorrow anyway.
Anywhoo I'm blithering on, I wouldn't be too worried about the Sidi's, they're ace boots and for all I've had a few probs with mine i wouldnt hesitate to recommend them, as I've said on here my mate's covered 30-40k miles in a pair and they're still going strong.
You're certainly not alone Soss. I know I don't look after my bike nearly as well as yours having seen it, but even I'm a bit miffed about the wear on those hangers. I'm pretty sure it's just the hard plastic on the heel (I have the GoreTex B2, so very similar) which has worn the coating on the metal away. I'm guessing it's a pretty thin/poor quality coating.
Nemesis - thanks for that idea; on my next bike I will certainly do that - either that or cover the heel plate with some black electricians tape.
S
surfsofa said:
You're certainly not alone Soss. I know I don't look after my bike nearly as well as yours having seen it, but even I'm a bit miffed about the wear on those hangers. I'm pretty sure it's just the hard plastic on the heel (I have the GoreTex B2, so very similar) which has worn the coating on the metal away. I'm guessing it's a pretty thin/poor quality coating.
I was thinking about this mate. On the Hornet hangers, right by the area that has been worn away by the Sidi heel, is a triangular gap in the hanger arm. Honda have put that gap there and put a rubber insert into the gap for presumably this reason; they expected the area to be one that a boot might damage. Unfortunately the size of the Sidi heel is a bit bigger than what Honda must have had in mind - the rubber insert takes quite a bit of the contact from the boot heel, but not all of it....S
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



