Motorbike workbench
Discussion
I'm thinking about getting one of those hydraulic lift tables for working on my bikes, I'm getting pretty fed up of lying on the floor trying to work on the old BMW, and trying to clean the Triumph properly.
There seems to be a fair variation in price, I need something that'll lift a BMW K100RT (which is something like 280KG fuelled!!), I've even considered making my own but that would also involve buying MIG welder.
So, whats best? where from? and how much do you need to spend to get a good one?
There seems to be a fair variation in price, I need something that'll lift a BMW K100RT (which is something like 280KG fuelled!!), I've even considered making my own but that would also involve buying MIG welder.
So, whats best? where from? and how much do you need to spend to get a good one?
Dibble said:
Hooli said:
having seen similar topics on a classic bike forum regulary i'd say you need to spend about £300 to get a good'un & making your own doesnt save that much due to the price of steel.
Yeah, but it means making stuff. ANd he said he'd have to buy a MIG. Tools + DIY + bikes = - strokes brandnew arc welder (£30 aldi)*

Hooli said:
Dibble said:
Hooli said:
having seen similar topics on a classic bike forum regulary i'd say you need to spend about £300 to get a good'un & making your own doesnt save that much due to the price of steel.
Yeah, but it means making stuff. ANd he said he'd have to buy a MIG. Tools + DIY + bikes = - strokes brandnew arc welder (£30 aldi)*

http://www.aldi.co.uk/uk/html/special_buys.htm
It changes every week though. I picked up the one from Aldi, it's decent enough for light duties, heaviest I've done is sills on a car and as far as I'm aware they're still going strong
It changes every week though. I picked up the one from Aldi, it's decent enough for light duties, heaviest I've done is sills on a car and as far as I'm aware they're still going strong

Stu R said:
http://www.aldi.co.uk/uk/html/special_buys.htm
It changes every week though. I picked up the one from Aldi, it's decent enough for light duties, heaviest I've done is sills on a car and as far as I'm aware they're still going strong
Bu663R no welders on there.It changes every week though. I picked up the one from Aldi, it's decent enough for light duties, heaviest I've done is sills on a car and as far as I'm aware they're still going strong

I did consider making one, I've got a stick welder and was going to build it using steel angle. But, and this is a fairly big but, I'm scared it fails and the BMW squashes me! It's a long time since I've actually welded anything, and it turns out I'm crap at it!
So £300 ish, or quite a bit of time building one probably invlving buying a decent Mig welder and learing to use it.
The K100 apparently makes a good trike base. Steel frame and it's got a big enough engine.....
So £300 ish, or quite a bit of time building one probably invlving buying a decent Mig welder and learing to use it.
The K100 apparently makes a good trike base. Steel frame and it's got a big enough engine.....
Get one of these if you have the room, money well spent. I bought a Sealy badged one 8 years ago and use it all the time. There are versions about with smaller table sizes but with this size you can use a paddock stand on it as well. Very stable and will cope with a BMW no problem.
http://www.machinemart.co.uk/shop/product/details/...
http://www.machinemart.co.uk/shop/product/details/...
D1 MAD said:
Get one of these if you have the room, money well spent. I bought a Sealy badged one 8 years ago and use it all the time. There are versions about with smaller table sizes but with this size you can use a paddock stand on it as well. Very stable and will cope with a BMW no problem.
http://www.machinemart.co.uk/shop/product/details/...
That's the one I was thinking of, can't go wrong at that price http://www.machinemart.co.uk/shop/product/details/...

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


