Front Brake Lever Travel????
Front Brake Lever Travel????
Author
Discussion

Ail Puant

Original Poster:

271 posts

227 months

Monday 3rd November 2008
quotequote all
How far can you all squeeze your front brake lever back towards the bars? Not in normal use, but with the bike stationary?
I was stopped by Trafpol and threatened with a PG9 on my 18 month old Gixxer today as in the officers opinion the bike was defective. He could, by using his whole hand pull the brake lever back to within about 10mm of the bar. I only use one finger to brake and can easily lock up the front or pull a stoppie by doing so. In use the lever only comes back about 10 to 15mm from it's starting position and no where near my other fingers on the bar.
I have spoken to my dealer and they have never heard that there must always be (by law according to the officer) at least a finger gap in front of the bar, no matter how many fingers you are pulling with or that there is a limit to how much travel is in the brake lever.
Can any officer issue a PG9 or does it need to be a more specially trained officer?

No particular gripes with the Trafpol, just curious and confused about how they decided that my bike was defective.

V8NRG

854 posts

274 months

Monday 3rd November 2008
quotequote all
If I try really hard (whilst stationary) I can get the lever to touch the bar briefly.

If this happened while moving it would mean I’d have already fallen off.

Even under heavy braking the lever only moves about 15mm in normal operation.

Sossige

3,176 posts

294 months

Monday 3rd November 2008
quotequote all
Sounds like a load of rubbish. I'd have told him to give me a producer for a valid MOT, or to sling his hook. How can he judge a brakes effectiveness versus travel? Did you get his number?

(Are you you sure it was a real copper and not a guy from Southampton on a white Pan with camera equipment on board?)

biggrin

S

Taita

8,021 posts

234 months

Monday 3rd November 2008
quotequote all
How odd.

mc101

459 posts

263 months

Monday 3rd November 2008
quotequote all
Magura 19.5 ratio - about 10 mm of total travel.

Busamav

2,954 posts

239 months

Monday 3rd November 2008
quotequote all
Just been to check mine , lever can be pulled to wihin 10mm of the bars ,

even with the ste brakes of a Busa , you wouldnt want to be doing that whilst moving

Ail Puant

Original Poster:

271 posts

227 months

Monday 3rd November 2008
quotequote all
Busamav said:
Just been to check mine , lever can be pulled to wihin 10mm of the bars ,

even with the ste brakes of a Busa , you wouldnt want to be doing that whilst moving
lol my thoughts exactly, I just don't understand what he was trying to prove/get across!

gareth h

4,334 posts

261 months

Monday 3rd November 2008
quotequote all
Sounds like you should take him for a quick spin to demonstrate how effective the brakes are!