Anyone For A Tuning Clinic?

Anyone For A Tuning Clinic?

Author
Discussion

Flintstone

Original Poster:

8,644 posts

248 months

Saturday 4th October 2003
quotequote all
A few weeks ago I was at Dave Walker's place near Norwich having an Emerald ECU installed and mapped.

He suggested that I might like to get together a few like-minded souls for a 'Tuning Clinic'. Say half a dozen different kit cars on a Sunday, all turn up at his place, put the cars on the rolling road for a tune-up after which we can walk around muttering things like "Bloody dyno must be wrong, I'm making MUCH more than that at the wheels".

I've put the idea to Den Tanner (kitcarman) with a view to the day out appearing in a later issue of 'Kit Car' and he's interested "...provided someone else can organise it." (So that'll be me then eh, Den? Lazy bugger).

Would you be interested in coming along and what would you bring?

Justin s

3,642 posts

262 months

Saturday 4th October 2003
quotequote all
My car was set up and Ecu done by Dave Walker,so 2ltr black top Zetec with throttle bodies is 182bhp.There,don't even need to turn up!!!!!

Busa_Rush

6,930 posts

252 months

Sunday 5th October 2003
quotequote all
I'll come along, Dax Rush, Hayabusa normally aspirated, for the time being SVA'd in a couple of weeks. Should be 175bhp to 185bhp.

chris_n

1,232 posts

259 months

Monday 6th October 2003
quotequote all
I could be interested depending on when. Car is a Dax Tojeiro with 3.5L SD1 Rover V8 plus a few tuning bits. In theory should produce 220 bhp at the flywheel according to Real Steel with the particular combination of cam/heads/manifold/carb. Would be interesting to see the reality!

Maybe it would warrant a write-up on PistonHeads if Kit Car aren't that bothered???

Chris

kitcarman

805 posts

249 months

Monday 6th October 2003
quotequote all
Flintstone said:
. . . suggested that I might like to get together a few like-minded souls for a 'Tuning Clinic'.
I've put the idea to Den Tanner (kitcarman) . . . and he's interested "...provided someone else can organise it."


I’ll arrange for a journalist to be there!
It’s a great idea!
Having said this, there’s no reason why it shouldn’t appear on/in PistonHeads too!

I think it was peetbee who said we’re all friends here

Busa_Rush

6,930 posts

252 months

Monday 6th October 2003
quotequote all
Why don't you come Den, you've got a kit car haven't you ?

robp

5,770 posts

265 months

Monday 6th October 2003
quotequote all
I know a Pistonheader (westie owner) who might be up for this, and how about non-kit cars?! I wouldnt mind popping across in my pug?

Flintstone

Original Poster:

8,644 posts

248 months

Monday 6th October 2003
quotequote all
Ok, looks like I misunderstood Den. Sorry

He must have meant for me to scout around (like this) and then he'll have the KC Ace Reporter with newly sharpened crayon along to record the oily bits.

I've noted those of you who are interested and tomorrow will have a chat with Dave Walker to see about his end of things.

After that it will just remain to pick a date when we can all be there.

'Ahll be beck'

Kevp

583 posts

252 months

Monday 6th October 2003
quotequote all
Justin s said:
My car was set up and Ecu done by Dave Walker,so 2ltr black top Zetec with throttle bodies is 182bhp.There,don't even need to turn up!!!!!


My car was set up also by Dave, 176bhp for 2.l Zetec. M3d.

Where did that extra come from?

Justin s

3,642 posts

262 months

Monday 6th October 2003
quotequote all
Dont know Kev.l have the print out and thats what it says.mmmm let me look 165.9BHP at the rear wheels,152 pound/foot torque at 5200 rpm.I bought it from a guy who had just built it up with a 3000 mile engine.Standard westie exhaust but when funds allow a nice SBD carbon jobbie.

kitcarman

805 posts

249 months

Monday 6th October 2003
quotequote all
Busa_Rush said:
Why don't you come Den, you've got a kit car haven't you ?

I used to own a large number of kit cars, however, following my breakdown I sold the entire content of the Pilgrim factory along with all my tools, cars and basically everything.
So, I don't have a kit car at the moment. I have a new design on the drawing board, but that won't test very well on a rolling road.
Having said all this, I'd be up for being at your tune up session in my BMW.
Den.

Ex-Biker

1,315 posts

248 months

Tuesday 7th October 2003
quotequote all
kitcarman said:

Busa_Rush said:
Why don't you come Den, you've got a kit car haven't you ?



Having said all this, I'd be up for being at your tune up session in my BMW.
Den.


No Kit car? Just an exec's pimp mobile . . . . I bet it's either a 520, 525 or probably a diesel and less than 3 years old.

I know you're going to piss in my tin now, but it's just for fun.

Next guess is an M3 or M5 'cause you're all rich up there!

kitcarman

805 posts

249 months

Tuesday 7th October 2003
quotequote all
Busa_Rush said:
Why don't you come Den, you've got a kit car haven't you ?

kitcarman said:
Having said all this, I'd be up for being at your tune up session in my BMW.
Den.

Ex-Biker said:
No Kit car? Just an exec's pimp mobile . . . .


Actually I’ve been driving a C reg Volvo. Its MOT expired last week, so its off to the knackers yard with it.
My plan is to buy my wife a better BMW estate (touring?) so that I can have the one she’s got at the moment. It’s a 320i (six cyl), 1996 on an N plate and worth maybe £3,500.
Hardly pimp mobiles?

Busa_Rush

6,930 posts

252 months

Tuesday 7th October 2003
quotequote all
Sorry Den, I just assumed you'd have one, you've probably driven more than we've even imagined owning ! maybe you could come along anyway, the more the merrier and it's always good to meet people with a passion for cars, kits especially.


mattstead

369 posts

247 months

Tuesday 7th October 2003
quotequote all
If Den's as shrewd a business man as he seems he should go down with you all to Dave walkers, and ask him if he wants to keep writing his technical tuning articles for kitcar now that ccc has packed in.

Flintstone

Original Poster:

8,644 posts

248 months

Tuesday 7th October 2003
quotequote all
I spoke to Dave Walker today, he'll be chatting to Iain Ayre and Den to sort out the fiscal and other arrangements.

Let's see what happens.