How do you tow a chimaera?
Discussion
Not a good idea.
The front is all fibreglass. You need to get onto the metal chassis. This means the tow rope has to go under the front. The angle the rope will go at is likely to damage the front.
Even winching them onto a tilt and slide trailer is a slow, careful job. This often requires blocks under the wheels to avoid damage. This will still be your best bet.
The front is all fibreglass. You need to get onto the metal chassis. This means the tow rope has to go under the front. The angle the rope will go at is likely to damage the front.
Even winching them onto a tilt and slide trailer is a slow, careful job. This often requires blocks under the wheels to avoid damage. This will still be your best bet.
Barkychoc said:
JonathanT said:
did I read somewhere about NOT towing a TVR with a rover gearbox, something to do with the propshaft or output drive not being lubed/cooled.
You could be right - the gearbox oil pump won't be driven if it is in neutral being towed will it?Gassing Station | Chimaera | Top of Page | What's New | My Stuff


