Swan neck cap

[B-Reight]

Anyone know what it's off and/or a part number?

Cheers

[tempus]

Mine uses a FC57 in Q.H. or GRC201 in Unipart,just a plain cap with a seal.Tempus

[rev-erend]

Adam Quantril had a few made up .. very cheap at about £2 each.

[TVRleigh_BBWR]

You can use a std one or one of Adams,
You just have to cut the springs off. so it's a sealing cap not a pressure cap.

[adam quantrill]

Did you try this Leigh? It does have a top seal so it should work fine as a sealing cap.

I have about 40 left which should start to shift really.

[Mr Tank]

Adam

Would like one of your caps, we could meet and exchange cash for goods, just let me know were etc!

Andy

[B-Reight]

Adam, Is it the sprung cap or plain cap that you have?

[adam quantrill]

It's sprung, but as Leigh says, you can take off the spring and just use the top end, as it has an upper seal. If you want one I can do this mod for you.

[TVRleigh_BBWR]

adam quantrill said:

Did you try this Leigh? It does have a top seal so it should work fine as a sealing cap.

I have about 40 left which should start to shift really.

Yes I did this and it worked.

Also I could do with another 2 or 3 for the truck.

[adam quantrill]

Nice one! I'll get a few off to you, just gotta check on postage. I'll email you.

[Mr Tank]

Adam

Don't sell them all yet, well that's till I have my two!

Andy