Advice - E61
Advice - E61
Author
Discussion

futie

Original Poster:

655 posts

306 months

Friday 5th December 2008
quotequote all
Hi all, just after advice. We've got one of these (same colour/etc):



.. am thinking of putting these wheels on it:



Reason being that one of the current alloys has a hole/crack in it, all tyres are fairly worn, one won't pass MoT. To replace the alloy (£450 OEM) and two tyres would be around £800.

The 'M6-look replicas' with cheapo tyres are £775 delivered.

Chav-tastic or good move?

rottie102

4,033 posts

214 months

Friday 5th December 2008
quotequote all
Go for it! I think those wheels look great!

Bill Carr

2,234 posts

264 months

Friday 5th December 2008
quotequote all
Couldn't you repair the holed alloy?

Personally, I prefer the non-M alloys.

futie

Original Poster:

655 posts

306 months

Friday 5th December 2008
quotequote all
The alloy has a crack on the inside and a small hole. The advice we've been given is that it's unrepairable which I think is fair enough.

SpeedIsProgress

233 posts

229 months

Friday 5th December 2008
quotequote all
Are the replica alloys any good, or are they going to give up the first time you hit a pothole (which unfortunately might not be too far away in this country).

I would also never put cheap tyres on my car. I
a. Like the grip better tyres offer and
b. after brakes they are probably the most important safety feature on your car.

chrisx666

808 posts

291 months

Saturday 6th December 2008
quotequote all
I agree with the above. Personally I would stick with genuine wheels and decent tyres. Resale/possible insurance issues/safety etc..

£450 sounds a bit steep for a cast wheel. I'm just looking in my 6-series accessory catalogue and most of the cast 18/19 wheels are under £265. Only the forged 19's are £405 each.

gizlaroc

17,251 posts

254 months

Saturday 6th December 2008
quotequote all
Genuine M5/6 wheels come up on ebay for not much more and they will fit your E61.


SJobson

13,833 posts

294 months

Saturday 6th December 2008
quotequote all
I'd be wary of replicas - they might be heavier, not as well made, etc. Why not try to find one replacement used alloy from Quarry Motors, Fab Direct or BM Autosport?