Wireless Network Problem
Discussion
I am trying to set up a wireless network, but I need to plug my modem into the main router via an ethernet connection. My modem only has a USB connector. The manual tells me I need to get a new modem which has a ethernet connection.
Is there any hub avaliable or connector that converts USB to Ethernet?
I found a Ethernet to USB one:
Do they make a USB to Ethernet one & would this work?
Or do I need a new modem?
Is there any hub avaliable or connector that converts USB to Ethernet?
I found a Ethernet to USB one:
Do they make a USB to Ethernet one & would this work?
Or do I need a new modem?
I think that you will need a new modem. Who/what BB have you got?
Depending upon who it is, and what kit you have, you may be able to get them to swap your USB to an ethernet modem.
IIRC, the main reason for giving out USB modems was to restrict 'home' users to one PC for a cheaper price, and charge SOHO/business more for an ethernet modem which allows several PC's connected.
I have NTL (ethernet) and run a (mac) wireless setup, so ask specific questions and I will try to help.
Sparks
Depending upon who it is, and what kit you have, you may be able to get them to swap your USB to an ethernet modem.
IIRC, the main reason for giving out USB modems was to restrict 'home' users to one PC for a cheaper price, and charge SOHO/business more for an ethernet modem which allows several PC's connected.
I have NTL (ethernet) and run a (mac) wireless setup, so ask specific questions and I will try to help.
Sparks
I would suggest that you need an ADSL router with an RJ45 connection.
Take a look at..
www.dabs.co.uk/uk/channels/hardware/networking/productView.htm?quicklinx=17P7
D.
Take a look at..
www.dabs.co.uk/uk/channels/hardware/networking/productView.htm?quicklinx=17P7
D.
davidd said:
I would suggest that you need an ADSL router with an RJ45 connection.
Take a look at..
www.dabs.co.uk/uk/channels/hardware/networking/productView.htm?quicklinx=17P7
D.
I'd also suggest an RJ45 ported router, but not that one. D-link have been good whenver i've tried them.
Just got it all working, just one problem. The cards don't seem to be powerful enough to get a signal through the walls in my house (they are extremely thick). The only way the signal can get through is if it's going up or down, through floor or ceiling.
Any ideas?
The cards are meant to be the most powerful so far.
Any ideas?
The cards are meant to be the most powerful so far.
The Linksys kit I use can be forced to use a lower speed in order to increase distance. However I can walk to the end of my garden (30ft) and still have a good signal with the base station at the front of the house.
You may want to try a different channel number in case it's an interference problem.
Does the software supplied show link quality or signal strength?
You may want to try a different channel number in case it's an interference problem.
Does the software supplied show link quality or signal strength?
marlboro said:
You may want to try a different channel number in case it's an interference problem.
Does the software supplied show link quality or signal strength?
How would I change the channel number?
The software shows perfect signal strength in areas where it doesn't need to go through walls. It tells me it's non existent where it does.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff