Tuscan diagnostic code list?

[barnesus]

Hi Can anyone detail the diagnostic code expalantions for the tuscan. The mytuscan.co.uk site has it but its been down for ages. I am getting E.


Ta

[S6PNJ]

Andy, look above your post, find 'This Forum'. Select 'Show FAQs' and it will be the first one in the list!

[so called]

Just in case, try this.

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[BGB autosport]

I got an E briefly this morning, did you fix it?

(E - Fuel level sensor not activating zero switch or switch broken)

[BigJL]

mytuscan.co.uk is back up now, just in case anyone else needs it!

Bleeding web hosts!

[Tuscan Chick]

I've got a list of these codes somewhere on the PC - I'll try to find it.

[Big Al.]

Tuscan Chick said:

I've got a list of these codes somewhere on the PC - I'll try to find it.

Why? you can see them on the link So Called pulled up.

[S6PNJ]

Give a man a fish and he'll feed for a day, teach him how to fish and he'll feed forever.

[andyoleary]

I had an interesting E code fault a long while back - after taking the pod apart I found that one of the small silver bolts that are used to fix the pod mounting bracket had come loose and lodged itself inbetween the microswitch/striker at the zero point on the fuel gauge so that the pod reported this error as the dial couldn't activate the switch.......had a similar thing with the water temp gauge a short while after (Code C). My bolts were not fitted with any spring/locking washers so they just worked themselves loose over time.

If it's not an obstruction to the microswitch then it's more likely to be an electrical fault with the switch or the ribbon cables/wiring to the Pod boards.

Andy