light pods

[snookes]

i've got a 400se and one of the lights when raised is slightly lower than should be. any ideas on how to adjust them or any ideas that will solve the issue

thanks

anthony

[djc100]

Two possible adjustments.
1) The pod sits against an ajustable rubber stop held by a couple of screws in a slot.
2) The operating rod between motor and pod is adjustable (need to remove light and backing to get into pod area to adjust) but pod will sit equally higher in down position if you adjust this.

Hope this helps
David

[snookes]

thanks david
will have a look at these over weekend

anthony

[Phil Mycock]

Also check to see that the linkage is tight on the motor shaft and hasn't swivelled to an incorrect angle.