Wood burning stove: Advise
Wood burning stove: Advise
Author
Discussion

HowMuchLonger

Original Poster:

3,041 posts

222 months

Sunday 4th January 2009
quotequote all
We are currently thinking of putting in a wood burning stove, but don't like the appearance of the traditional ones.
Current favourite is this one by Austroflamm:


Any other suggestions?

juice

9,863 posts

311 months

Sunday 4th January 2009
quotequote all
Quick - Change your title to "Advice" - it's a hanging offence round here wink

Eric Mc

125,607 posts

294 months

Sunday 4th January 2009
quotequote all
I hope you meant that as a verb

(Advise v' advice - my theme for the day)

He could be in the clear - it could be read as the verb version.

smile

Edited by Eric Mc on Sunday 4th January 17:34

Risotto

3,933 posts

241 months

Sunday 4th January 2009
quotequote all
Morso do some fairly modern ones - this sort of thing:



Edited by Risotto on Sunday 4th January 17:37

spdpug98

1,551 posts

251 months

Sunday 4th January 2009
quotequote all
We've just had a Stovax Riva 66 installed and it is fantastic, it is very similar to the one in your picture. It is installed recessed into the wall so is flush with the wall surface, we did have to have a chimney built outside.

thinfourth2

32,414 posts

233 months

Sunday 4th January 2009
quotequote all
be warned alot of the designer ones don't have a back boiler so are basically sodding useless

Unless you just want a pretty thing that kicks out a bit of heat





mechsympathy

58,592 posts

284 months

Sunday 4th January 2009
quotequote all
thinfourth2 said:
be warned alot of the designer ones don't have a back boiler so are basically sodding useless
I thought a back boiler was for heating water.

We've just got a Scan Anderson which is a traditional shape but without the flouncy bits that a lot of the trad stoves are covered in. Morso do some similar ones too.

Driller

8,310 posts

307 months

Sunday 4th January 2009
quotequote all
thinfourth2 said:
be warned alot of the designer ones don't have a back boiler so are basically sodding useless

Unless you just want a pretty thing that kicks out a bit of heat
That's right there is no where near the same heating inertia (if that's the right term) between these and say a Jotul. Nice to look at though.

This is from Arkiane:








Darkslider

3,084 posts

218 months

Sunday 4th January 2009
quotequote all
Look very pretty but you'll have to clean them religiously. I'll bet all those pictures were taken in the first 3 minutes of a fire started with petrol, because otherwise the glass would be black with soot inside.

silver.fox.2008

820 posts

219 months

Sunday 4th January 2009
quotequote all
Darkslider said:
Look very pretty but you'll have to clean them religiously. I'll bet all those pictures were taken in the first 3 minutes of a fire started with petrol, because otherwise the glass would be black with soot inside.
I think alot of these come with glass that self cleans once it reaches a certain temperature.

Mobile Chicane

21,985 posts

241 months

Sunday 4th January 2009
quotequote all
A woodburner is nice, but it is a filthy way of heating. Ash gets everywhere, and supplies of well-seasoned firewood can be a problem. Many's the time I've stunk the house out with wet firewood / kindling, however at least I don't have moths in my clothes.

thinfourth2

32,414 posts

233 months

Sunday 4th January 2009
quotequote all
mechsympathy said:
thinfourth2 said:
be warned alot of the designer ones don't have a back boiler so are basically sodding useless
I thought a back boiler was for heating water.
Yep and that hot water then goes round our radiators and keeps the house warm

Modern wood fired heating systems are damn clever. Even our old fashioned Aarrow Si40 keeps the rads ticking along at a nice 50C without much effort




When we selfbuild i want a 25Kw monster stove

Samol

236 posts

287 months

Sunday 4th January 2009
quotequote all
http://www.clearviewstoves.com/index.htm

These guys are very good, their stove glass stay clear due to some secondry burn system. They are a little traditional but not a "pretty" as some..

CDP

8,041 posts

283 months

Sunday 4th January 2009
quotequote all
mechsympathy said:
thinfourth2 said:
be warned alot of the designer ones don't have a back boiler so are basically sodding useless
I thought a back boiler was for heating water.

We've just got a Scan Anderson which is a traditional shape but without the flouncy bits that a lot of the trad stoves are covered in. Morso do some similar ones too.
My parents have just bought a stove that provides hot water and central heating - they're just trying to find somebody to fit it. The chimney lining isn't a DIY job. Even if it were you have to be licensed.

I'm going to get one for my house soon. A hotplate is pretty useful for the number of power cuts we get these days. It will be essential in the next few years as the National Grid runs down.

philthy

4,697 posts

269 months

Sunday 4th January 2009
quotequote all

mechsympathy

58,592 posts

284 months

Sunday 4th January 2009
quotequote all
thinfourth2 said:
Yep and that hot water then goes round our radiators and keeps the house warm
thumbupUnfortunately it's not always an option, particularly if you don't want to do a load of extra work.

HowMuchLonger

Original Poster:

3,041 posts

222 months

Sunday 4th January 2009
quotequote all
Advise: As in please advise me as to what other stoves I should be looking at.
I thought that putting "Advise" was a bit more punctual.laugh

satans worm

2,464 posts

246 months

Sunday 4th January 2009
quotequote all
we are putting a double sided Fire belly in our new build http://www.firebellystoves.com/firebelly%20web/FB1...

HowMuchLonger

Original Poster:

3,041 posts

222 months

Sunday 4th January 2009
quotequote all
Can we have a wood burner in addition to our conventional boiler? So that when we use the wood burner, it overrides the oil burner?

DavidY

4,492 posts

313 months

Sunday 4th January 2009
quotequote all
Yes

You need one of these - A Dunsley Baker Neutraliser

http://www.dunsleyheat.co.uk/linkupsys.htm

davidy