Washer Bottle Lid

[asaparker]

I've lost the top from my washer bottle. Any ideas what it is from or where you can source one? I have seen the tops from TVR Power [if I remember the right website]. However, these look like they fit to a washer bottle without the neck extension fitted to a Tuscan.

[kevin63]

There is one HERE there is a photo showing when you see all parts but not shown on the individual part for some reason.

[ec1 eex]

I recall someone saying that the bottle top off one of those plastic milk bottles you get from the supermarket is a good fit.

[D14 AYS]

ec1 eex said:

I recall someone saying that the bottle top off one of those plastic milk bottles you get from the supermarket is a good fit.

[asaparker]

Thank you for the advice - including the milk bottle top suggestion!

[Night Rider]

Did you loose it after taking off the main bonnet? Have a look in the pepper pot right under where it is fixed under the car. I found mine when I removed it to clear. I remember being so happy....how sad

[fat80b]

Mine has a ford logo on it, so I am guessing it is not the same as other people's then.
I had presumed that the washer bottle neck was a ford item and the cap was too?

Having said that, it is not the best fit and takes a bit of fiddling to squeeze it on so maybe the previous owner had a similar issue?

Bob

[tuscan_al]

Why bother with one? Would need some serious cornering to get any water out of it!! And dont think you need to worry about crap getting in from where its situated.

[froggie]

Ford escort / capri / fiesta. you could pierce the top and attach a lanyard between it and the neck so it doesn't do a vanishing act.similar principle as mooring a boat but on a smaller scale