weber linkage kit photos

[guru_1071]

does anyone have a photo of an underslung weber linkage kit fitted to a pair of dcoe's? (the sort that tugs from the side)

im trying to workout the clerance between the carbs and the dizzy before i commit to a linkage kit!

cheers

[thunderbelmont]

What car/engine is this to go on?

[andygo]

Try Burton Performance. They will probably be able to tell you rather than you guess.

[guru_1071]

thunderbelmont said:

What car/engine is this to go on?

1430 mini 8 port

[guru_1071]

andygo said:

Try Burton Performance. They will probably be able to tell you rather than you guess.

ive tried most of the usual suapects - none will commit and just um and ahh.......

will give them a try thanks

[thunderbelmont]

You need to talk to Longman.

What they don't know about 8 port mini engine's isn't worth knowing!

[NTEL]

Have you tried Minisport in Padiham? Speak to Rob in the rolling road dept, he is st hot on webers.

[toby9980]

Hi

I have a very unusual linkage on my Piper GTT which runs a 1600 Xflow. As you look at the webbers straight on, the accelerator cable comes in from the front and runs over a wheel which is monuted between the carbs with a type of leg that comes out to connect into the linkage of the back carb and in turn that is connected to the front carb. Sounds a bit fiddly but it works very well as I also suffered from lack of space (bonnet very close to top of carbs and dizzy / fuel pump below. Might take a bit of thought but im sure you will be able to construct something to do the job with the space available.