Really short network and ethernet cable.....
Really short network and ethernet cable.....
Author
Discussion

dan1981

18,093 posts

228 months

Wednesday 7th January 2009
quotequote all
I need a really short ethernet cable and a really short network cable - less than 20cm each infact prob only about 10 cm each.

Any ideas where i can get them?

Everywhere seem to assume you need metres and metres of the things.....

Cheers

Dan

Aubrey

1,157 posts

225 months

Wednesday 7th January 2009
quotequote all
Buy a 20cm length of cable and just fit the ethernet plugs to it?

Graham E

13,018 posts

215 months

Wednesday 7th January 2009
quotequote all
unless you're arnie*, you can just buy some cat5e, and some plugs. crimping is easier than you might think, as well

since this was a geeky question, there is an equally geeky movie reference here. Free pair of white socks for the first person to spot it

Amused2death

2,525 posts

225 months

Wednesday 7th January 2009
quotequote all
Skynet?

.

dan1981

18,093 posts

228 months

Wednesday 7th January 2009
quotequote all
already got a long cable.... can i just snip that down to size, pull the connector of and stick it back on? do i need a special tool to crimp the cable?

Graham E

13,018 posts

215 months

Wednesday 7th January 2009
quotequote all
It's a cripmp, and you do need a tool. You can't reuse an old end, either. the good news is that CPC or Maplin can sell you the tool, bits and cable for less than a 1m patch lead would be in PC world.

Oh, and skynet is good, but it's not the one

dave_s13

14,026 posts

298 months

Wednesday 7th January 2009
quotequote all
You can just cut it, strip back all the wires, splice together and tape back up with electrical tape. That's how my HTPC is wired to the router upstairs, works fine and has done for over a year, bit of a bodge though.

MonkeyBusiness

4,241 posts

216 months

Wednesday 7th January 2009
quotequote all
dan1981 said:
already got a long cable.... can i just snip that down to size, pull the connector of and stick it back on? do i need a special tool to crimp the cable?
You will need a crimping tool.
I am not back in the office until Friday but I'll make you one up if needed. PM me.

Not sure what you mean though about an ethernet cable and a network cable. Do you just need a simple cat5 cable?

mouseymousey

2,642 posts

266 months

Wednesday 7th January 2009
quotequote all
Probably too long but I can post you a couple of 50cm cables if you want them?

Paulbav

2,144 posts

264 months

Wednesday 7th January 2009
quotequote all
I'm sure any networking company will make one for you for a few quid, if not just buy the cat5e, some RJ45 crimps and a crimp tool, bob's your uncle you have a lead and also 304.8 meters of spare cable in case you make a mistake!

UpTheIron

4,058 posts

297 months

Wednesday 7th January 2009
quotequote all
dan1981 said:
A really short ethernet cable and a really short network cable
And the difference between the two is?

Just buy a crimp tool and a few connectors (i.e. more than you need, as you'll need some practice I bet) and make them from your existing cable.

Or just PM me your address and I'll make a couple up this weekend and stick them in the post.

Edited by UpTheIron on Wednesday 7th January 21:38


Edited by UpTheIron on Wednesday 7th January 21:38

Pork

9,455 posts

263 months

Wednesday 7th January 2009
quotequote all
mouseymousey said:
Probably too long but I can post you a couple of 50cm cables if you want them?
clap for the offer! Thats the PH spirit biggrin

dan1981

18,093 posts

228 months

Wednesday 7th January 2009
quotequote all
MonkeyBusiness said:
dan1981 said:
already got a long cable.... can i just snip that down to size, pull the connector of and stick it back on? do i need a special tool to crimp the cable?
You will need a crimping tool.
I am not back in the office until Friday but I'll make you one up if needed. PM me.

Not sure what you mean though about an ethernet cable and a network cable. Do you just need a simple cat5 cable?
Cheer Monkeybusiness - appreciate that - I'll see how I get on tomorrow if not i'll drop you a PM.

thumbup

Thanks also to Mouseymousey - but yeah 50 cm will be too long.

ETA: Yeah its just standard CAT5 I need. My title made that very unclear.

Edited by dan1981 on Wednesday 7th January 21:39


eta: Again: Thanks also to Up the Iron - PH is great.

Edited by dan1981 on Wednesday 7th January 21:40

UpTheIron

4,058 posts

297 months

Wednesday 7th January 2009
quotequote all
Graham E said:
unless you're arnie*, you can just buy some cat5e, and some plugs. crimping is easier than you might think, as well

since this was a geeky question, there is an equally geeky movie reference here. Free pair of white socks for the first person to spot it
Because he doesn't need a terminator? I'm too young for Thinnet biggrin

Xenocide

4,286 posts

237 months

Wednesday 7th January 2009
quotequote all
I'll send some out to you tomorrow. PM me with how long and how many you want. I'll make them esp for you.

Graham E

13,018 posts

215 months

Wednesday 7th January 2009
quotequote all
Close Mr. Iron. I was referring to the fact that Arnie would have to get someone else to do it for him, because he cannot self terminate.

I'll get my coat (and buy some white socks)

jimmyb

12,254 posts

245 months

Wednesday 7th January 2009
quotequote all
Can I ask what you need them for?

And likewise I am quite happy to make up leads for people if they want them.

Edited by jimmyb on Wednesday 7th January 21:51

dan1981

18,093 posts

228 months

Thursday 8th January 2009
quotequote all
jimmyb said:
Can I ask what you need them for?

And likewise I am quite happy to make up leads for people if they want them.

Edited by jimmyb on Wednesday 7th January 21:51
I'm making a dwarf computer network. Obviosuly the distances between things are much smaller....

ok no i'm not - i'm trying to tidy the cables up behind the TV where the router / xbox / modem all sit and just don't need yards and yards of cable

Once again thanks for all the very kind offers.

Cheers

Dan

peterguk V6 KWK

2,622 posts

246 months

Thursday 8th January 2009
quotequote all
Dan. I'm in Barnsley have have a tool i can lend you. Ooohhh.. errr.. wink

dwilkie

2,222 posts

215 months

Thursday 8th January 2009
quotequote all
I did have a tool I could lend you, until security at Aberdeen airport confiscated it as a dangerous weapon (I kid you not).

I'll have a look in the comms room and see what I have lying around, I know I have some pointlessly short ones. If you make them yourself, it does take a little practice your first one might not work...

Just make sure you match the colour pattern at each end and that each strand goes into the part of the plug you think it has. tongue out