ECU gone HELP Which one to replace it ?
Discussion
Hi All,
Ecu got some water in and has fried.
I have been looking for a replacement, but am a bit confused about all the part numbers.
Can I use any ECU box as long as it is a 14CUX hotwire system?
I've seen part numbers PRC9061 and PRC7081 and others, how do I know which I can use
I had a tornado chip in my old ecu, I also have a spare standard chip from my origional ECU
Any help would be great as its my everyday car and Im stuffed without it
Ecu got some water in and has fried.
I have been looking for a replacement, but am a bit confused about all the part numbers.
Can I use any ECU box as long as it is a 14CUX hotwire system?
I've seen part numbers PRC9061 and PRC7081 and others, how do I know which I can use
I had a tornado chip in my old ecu, I also have a spare standard chip from my origional ECU
Any help would be great as its my everyday car and Im stuffed without it
Mine shorted out two years ago, i found a standard second hand Lucas 14CUX ECU from a land rover dealer on ebay for £100 and put the chip from my old in it, the car's been running fine ever since.
I cant remember the name of the company that I'm sure there were quite a few of them.
Hope that helps.
Lee
I cant remember the name of the company that I'm sure there were quite a few of them.
Hope that helps.
Lee
Just try and get one of the same year or so, there are some minor hardware changes over the years. The RPI site shows you what differences to look for on the main PCB to suit your Tornado.
http://www.v8engines.com/carbs-2.htm
Mark
http://www.v8engines.com/carbs-2.htm
Mark
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


