Discussion
When recently removing the dials from my dash board, one of the LEDs for the MIL light was well and truely glued in, and I ended up breaking one of the LED legs when trying to remove it.
Does anyone know what LED is needed to replace it?
Also I know some people have replaced all dash lights with LED types, but the majority of pics/link to the LED types are out of date now. I haven't seen any reference to the 1W type (BA9 1W Wide Angled High Power Led Bulb Xenon White from: http://www.ultraleds.co.uk/automotive-bulbs-ba9s-c... currently available from Ultra LEDs, but am wondering if they would be suitable, and if they may be too bright for oil and speedo gauge etc? Or would the (233) BA9 - 9mm BC 9 Leds Blue Wide Angle Bulb , be more suitable (if I could find them in white)?
P.S. Does anyone have any tips on re-attaching the alloy LED holders with the castellated type locking washers which are used to fix them to the dash. Am really struggling, and don't want to damage the dash in the process of fixing them. Should they be cut and fixture glued to dash?
Does anyone know what LED is needed to replace it?
Also I know some people have replaced all dash lights with LED types, but the majority of pics/link to the LED types are out of date now. I haven't seen any reference to the 1W type (BA9 1W Wide Angled High Power Led Bulb Xenon White from: http://www.ultraleds.co.uk/automotive-bulbs-ba9s-c... currently available from Ultra LEDs, but am wondering if they would be suitable, and if they may be too bright for oil and speedo gauge etc? Or would the (233) BA9 - 9mm BC 9 Leds Blue Wide Angle Bulb , be more suitable (if I could find them in white)?
P.S. Does anyone have any tips on re-attaching the alloy LED holders with the castellated type locking washers which are used to fix them to the dash. Am really struggling, and don't want to damage the dash in the process of fixing them. Should they be cut and fixture glued to dash?
Hi i striped my dash down to polish it couple of months ago i did not put those lock washers back on just used a little super glue. it does not take a lot to hold in place and when its all built back up on the board it is pretty solid. for led, try
http://www.maplin.co.uk/Search.aspx?criteria=led&a...
cheers Scotty
http://www.maplin.co.uk/Search.aspx?criteria=led&a...
cheers Scotty
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


