Wideband sensor Q`s
Discussion
It would usually go upstream of the cat. You would need to cut and weld it which might be possible in the car but will be much much easier if you take it out. Doing it in situ would also mean stuff dropping into the top of the cat which isn't good news. I can't think of any good reason to do it in situ.
I hear the same stories about the LC1. I don't have enough experience of them to know how reliable they are, but I haven't had any problems with mine so far. There are quite a few alternatives, mostly using the same sensor. I have also got a Zeitronix ZT-1 which combines several sensors including wideband lambda and EGT onto a fairly slim digital display with logging output. Unfortunately I managed to wipe out the loom for this during a small engine bay fire (white hot exhausts don't get on well with oil hoses as it turns out) so haven't had a chance to use it much. It's a nice bit of kit though.
GreenV8S said:
I hear the same stories about the LC1. I don't have enough experience of them to know how reliable they are, but I haven't had any problems with mine so far. There are quite a few alternatives, mostly using the same sensor. I have also got a Zeitronix ZT-1 which combines several sensors including wideband lambda and EGT onto a fairly slim digital display with logging output. Unfortunately I managed to wipe out the loom for this during a small engine bay fire (white hot exhausts don't get on well with oil hoses as it turns out) so haven't had a chance to use it much. It's a nice bit of kit though.
Thanks Peter i think i`ll drop adyw a line as i think hes just fitted one in his griffGassing Station | Chimaera | Top of Page | What's New | My Stuff



