No fuel???
No fuel???
Author
Discussion

Bomber Denton

Original Poster:

8,762 posts

299 months

Wednesday 14th January 2009
quotequote all
Got a problem with the Chimaera it spins over fine but no fuel?

The pump is priming and I have checked the inertia switch but the plugs are dry, any ideas???

Cheers,

Corin

chrispitman

742 posts

285 months

Thursday 15th January 2009
quotequote all
Have you check to see if there is fuel in the injector rail, on drive sid ethere is a point that lloks like a tyre valve becareful not to spray over engine. If you have presure I would look at the main electrical feed to the injector to see if there is power getting to them.

Bomber Denton

Original Poster:

8,762 posts

299 months

Thursday 15th January 2009
quotequote all
Thanks, I checked the fuel rail etc and that was all good, on futher examination the fuel pump relay I popped in had a different layout, bypassed it and hey presto!

New relay here we come.

Thanks also to AdyW for the loan of an ECU and ideas etc and Richard at Dulford for letting me bend his ear.

daz the plumber

14,997 posts

262 months

Friday 16th January 2009
quotequote all
have you checked if there is fuel in the tank ?

chrispitman

742 posts

285 months

Friday 16th January 2009
quotequote all
There is another relay on the loom same type as the fuel pump one. This also controls power to under the bonnet. If you get problems again you can swap then over to try an find the fault.

The fuel relay is prone to failing, mine just stopped one day. As a temp fix if you prize of the metal off then run some fine wet/dry between the contacts it will probably work.