shotblast and powdercoat
shotblast and powdercoat
Author
Discussion

neal1980

Original Poster:

2,585 posts

270 months

Friday 16th January 2009
quotequote all
I have my chassis ready for shot blast just got a price from a local firm for the blast and paint of chassis only and its £500 + VAT not including arms etc. Sounds steep to me but can anyone confirm???

I have access to a nice big van so if anyone knows someone that likes to deal with cash smile let me know...

Chassis looking quite good for 120K miles 1996 going to replace to 2 outrigger tubes anyway as I have gone this far.

Cheers

Neal

andy-w

1,987 posts

257 months

Friday 16th January 2009
quotequote all
This probably wont help but i got mine shotblasted zinc sprayed and then powder coated for £130 up here in the north east...they did a very good job as well...i had quotes from 3 places and not one of them was over £300...£500 does sound a bit steep....

neal1980

Original Poster:

2,585 posts

270 months

Friday 16th January 2009
quotequote all
I dont mind travelling to be honest if its worth it. I am in Midlands. Can I have the company that did that for you andy?

Cheers

andy-w

1,987 posts

257 months

Friday 16th January 2009
quotequote all
give me a sec and i will dig out the email i was sent with the quote on...the company name is north east powder coating....something like that....bear with me...!

Cant find the email...thought i had saved it but obviously not...

the company is
North Eastern Powder Coating
Crowther Indstrial Estate
Washington
Tyne and Wear
NE38 0AB
Tel 0191 4177576

If you want i can stop off there on my way home tonight and see if they will give me a quote...i had mine done two years ago now so the prices might have changed...or youo can give them a call and see what they say.
They are just around the corner from my house and are a sound bunch.



Edited by andy-w on Friday 16th January 11:32

spend

12,581 posts

282 months

Friday 16th January 2009
quotequote all
Have you tried Brum / Cov / Kiddy / Wolves areas Neal? it seems prices vary depending on what industries are in the local area. For example in Chesterfield we seem to have lots of work for oil/gas pipelines & pressure vessels, so quite a few powder coaters??

f@-pots

204 posts

234 months

Friday 16th January 2009
quotequote all
Hi, could I just air a word of caution. Powder coating as with any form of protective treatment is only as good as the thorough preparation of the parts and the correct execution of the application process. I built a kitcar (Midtec Spyder) back in the early nineties and duly paid for blasting and powder coating of the chassis and suspension plus quite a few other associated parts. By the time I had the rolling chassis completed (2 months), rust was eminating from just about every joint on the chassis and on the drive shafts it had chipped off in various places after only assembly handling.It was obvious from the lack of adhesion of the plastic coating that not only had the metal not been prepared properly but the job had been rushed through the ovens not giving the metal sufficient temperature to promote a strong bond. Basically the plastic(powder) had melted to form a shiny surface but that was all. Come to think of it I reckon my poor Chim might have been to the same place!! Any road I'm not trying to urinate on anyones strawberrys here but like most things automotive , find out from previous happy/unhappy customers what the quality is like before parting with your hard earned!

Nick........................

andy-w

1,987 posts

257 months

Friday 16th January 2009
quotequote all
f@-pots said:
Powder coating as with any form of protective treatment is only as good as the thorough preparation of the parts and the correct execution of the application process.
True...but then i cant think of any process or job where that wouldnt be true....????

spend

12,581 posts

282 months

Friday 16th January 2009
quotequote all
Finding places that provide workmanship rather than spotty oik processing is always high on my priorities for most services / suppliers..

Surprisingly only Markblitz has pointed out caution in buying new parts off fleabay, many 'advices' for sourcing things scare the hell out of me (not quite to piss boiling point - but close). Its also quite difficult with the name/shame rules to point out specifics, apart from peoples natural 'undying allegiances' (founded or not as maybe?)... I'm also guilty in that when I find good suppliers I am not always keen to share them... not solely for selfish reasons but others may find even better sources if they are not handed it off a plate wink

K4TRV

1,819 posts

283 months

Friday 16th January 2009
quotequote all
I should also check what can be applied - I asked for zinc coating with a powder coat finish on a tow bar. Specialist said one or the other, you can't coat zinc.

Check what will last before parting with your money.

Trev

TJC46

2,199 posts

237 months

Friday 16th January 2009
quotequote all
Hi Neal i have had a few quotes of companys within sheffield/south yorks, they were for shot/beadblast the main chassis, and all wishbones and the 2 no rear hub carriers, then spray straight after with one coat of 2 pack zinc based epoxy primer. One was £170 and the other was £200. More primer coats and finish coats can be applied at extra cost. The company that quoted £200 had done tvr"s before[ i think they had done some for R.T Racing in Sheffield] I think this is the company im going to use and with a bit of negotiation[credit crunch and all that] i think i can get the quote lower, thanks Tom. rolleyes

rigga

8,808 posts

232 months

Friday 16th January 2009
quotequote all
Pop over to the cerbera forum and pm Brummie,he with the unfeasably potent LS engined car..... he did a complete chassis strip and recoat prior to installing the chevvy lump,in Birmingham so might have details of a place loacal for you.....

Hoover.

5,993 posts

273 months

Saturday 17th January 2009
quotequote all
...... one our club members had his chasis nylon coated.....

apparently this what the race cars had done to them.....

looks fantastic, and very durable

GAVC

163 posts

258 months

Saturday 17th January 2009
quotequote all
Have a word with Warren at TopCats Aylesbury.

constablergt

73 posts

218 months

Saturday 17th January 2009
quotequote all
Hi just had my chimp 1998 chassis shot blasted, then new out riggers both sides now it is going to be galvanized this week, then i will clean it up and it is going to be powder coated this will included degassing in oven as well next week. I have had 9 wish bones done as well in the same way, i did one spare one i had hence 9. All for £800 which did not think was too bad considering the amount of work going in this, i will post pics soon if people want. Cheers Rick.

Edited by constablergt on Saturday 17th January 23:49

scotty_d

6,795 posts

225 months

Sunday 18th January 2009
quotequote all
Can the galvanizing process sometimes cause steel to go brittle?

Chassis 33

6,194 posts

313 months

Sunday 18th January 2009
quotequote all
Give Tim Hood at Mallory Industrial Coatings a shout; he builds and races V8 Sagaris when he's not powder coating.

Mallory Industrial Coatings Ltd.
Unit 1a Peckleton Lane Industrial Estate
Peckleton
Leicester
LE9 7RN
Leicestershire

Tel: 01455 828195
Fax: 01455 824935

Regards
Iain

neal1980

Original Poster:

2,585 posts

270 months

Sunday 18th January 2009
quotequote all
Thanks for all the help above. I will contact people tomorrow only just got the net back.