New car lift
New car lift
Author
Discussion

everitj

Original Poster:

262 posts

272 months

Sunday 18th January 2009
quotequote all
Got the car up on the lift today ready to do some winter jobs, was quite pleased with the lift, should be easy to get all the jobs done now..


daz the plumber

14,997 posts

262 months

Sunday 18th January 2009
quotequote all
is it safe ?

peaktorque

1,807 posts

242 months

Sunday 18th January 2009
quotequote all
Did you have to drive it onto that wood to clear the lift?

Should make life a bit easier smile

lesstatt

4,318 posts

221 months

Sunday 18th January 2009
quotequote all
Actually i was thinking that, doesnt look too wide to spread the load past the actual edge of the car, wouldnt be too keen underneath that hanging off a spanner

Pupp

13,036 posts

303 months

Sunday 18th January 2009
quotequote all
I'm sure it must be an optical illusion but the car seems considerably wider than the base of the lift? What make is it?


everitj

Original Poster:

262 posts

272 months

Sunday 18th January 2009
quotequote all
Yeah had to raise it up a little as the exhaust just caught the lift as I drove into the garage. Seems fairly sturdy up there, plus the lift has a fairly small footprint so most bits are exposed. Main reason was to change the clutch fluid (looks like it's never been done dispite full history at tvr specialist) plus an oil change and a chasis inspection. Should be easier than last time when i did it on ramps...

everitj

Original Poster:

262 posts

272 months

Sunday 18th January 2009
quotequote all
Pupp said:
I'm sure it must be an optical illusion but the car seems considerably wider than the base of the lift? What make is it?
It's a clarke I think, it is narrower than the car but most of the weight is down the center of the car anyway so should be fine..

sparkesp

298 posts

226 months

Sunday 18th January 2009
quotequote all
Looks a very useful bit of kit for those of us without the luxury of a double garage.

Where did you get it from. Have looked on the clarke web site, cant see anything like this.

everitj

Original Poster:

262 posts

272 months

Sunday 18th January 2009
quotequote all
It's called a Clarke Strong-arm. Nicely made too, got it from a friend of mine. Has a seperate hydraulic unit. Very smooth operation as well.

Torque Matters

3,606 posts

263 months

Sunday 18th January 2009
quotequote all
Be careful...

Pushrod-Power

233 posts

216 months

Sunday 18th January 2009
quotequote all
If you was that bothered would not take much to secure it to the floor with some kind of raw bolt fastners and loops,nice piece of kit thumbup

Johno

8,593 posts

313 months

Sunday 18th January 2009
quotequote all
Clarke only advertise motorcycle lifts on their site and I can't find reference for a car capable lift.

Have you a model number ?

Hut49

3,544 posts

293 months

Sunday 18th January 2009
quotequote all
Something doesn't look right to me, way too narrow a base....looks like the first frame of a YouTube vid....

Torque Matters

3,606 posts

263 months

Sunday 18th January 2009
quotequote all
To feel safe working under my 4 post ramp I ensure that all 8 locking pins are in place and that the car is not supported by the lifting mechanism itself. The last part is a typical set up for lifting equipment.

dhf

1,103 posts

225 months

Sunday 18th January 2009
quotequote all
price ?

biggiles

2,190 posts

256 months

Monday 19th January 2009
quotequote all
That looks like a motorcycle lift... if so... I certainly wouldn't go underneath it. Or put my car on it.

I bought an installed a 2-post car lift a couple of years ago. It weighs well over a ton and has enormous steel spreaders to balance & support it on the floor. These are firmly fixed to the floor with rather large shield bolts. As recommended by the manufacturer and corroborated by looking at the tech specs of the bolts and the basic structure geometry (I have a couple of engineering degrees).

I expect you know precisely what you're doing, so many of these (well-meaning) comments will be in vain, but I really hope that's not a motorcycle lift just sitting on a concrete floor!

Stu247

815 posts

277 months

Monday 19th January 2009
quotequote all
That looks exactly like a motorcycle or mini tractor lift...at best designed for 700Kg max.

I would not use that under any circumstances !
My advice...get the car off it pronto and give it back to your mate.

schmokin1

1,223 posts

243 months

Monday 19th January 2009
quotequote all
looks pretty similar to this

http://www.holden.co.uk/displayproduct.asp?sg=3&am...

rather than a bike lift but i would check the rating as a matter of course. the above is rated 2 1/2 ton and is very easy to use.

everitj

Original Poster:

262 posts

272 months

Monday 19th January 2009
quotequote all
Don't worry chaps it's deffinatly a car lift. Rated to 1800kg. Very stable actually, if you think about it all the weight in a tvr is down the center line so no chance of it tipping. I wouldn't get under it if i didn't think it was safe, quite similar to the link above..

VerySideways

10,272 posts

303 months

Monday 19th January 2009
quotequote all
everitj said:
Don't worry chaps it's deffinatly a car lift. Rated to 1800kg. Very stable actually, if you think about it all the weight in a tvr is down the center line so no chance of it tipping. I wouldn't get under it if i didn't think it was safe, quite similar to the link above..
How much, where from?