Is this a problem?
Is this a problem?
Author
Discussion

lewis_sharman

Original Poster:

5,958 posts

222 months

Monday 19th January 2009
quotequote all
Descided today to start the process of moving the battery into the boot, as its a right PITA at the moment to do anything with and it would be nice to have the extra legroom.

Anyways, after removing the battery cover i have noticed that one of the plugs (presumably from the ECU) appears to have been on fire at some point. This did ring some alarm bells but it isnt connected to anything, so i was just wondering if this is going to have any adverse effects.

I will get a photo of it later incase anyone can identify what its there for.

Cheers,
Lewis

lotusandy

257 posts

302 months

Tuesday 20th January 2009
quotequote all
Sorry don't have any idea about the unused socket that has been burnt, but I am also about to re-locate the battery to allow the wife to fit in the car!
Keep us posted how you get on..

Andy

S7Paul

2,103 posts

265 months

Tuesday 20th January 2009
quotequote all
When I tidied up the wiring above the battery I found that one of the wires leading to the diagnostic connector had overheated to the point that the insulation had come off. This sounds very similar to your problem. I have yet to establish the cause of the problem.

barnpot

24 posts

267 months

Tuesday 20th January 2009
quotequote all
I don't think you need worry too much. If the electrical connection starts to deteriorate then resistance goes up and due to occasional large currents this can generate heat. This can make the insulating plastic melt but doesn't always mean it caught fire.

When you move the battery you will at some point disconnect and reconnect and this should restore a good electrical connection.

Would keep an occasional eye on it though, esp if the battery is now next to the fuel tank!

david

Blues

8,546 posts

250 months

Tuesday 20th January 2009
quotequote all
I'd be interested to hear how this goes.
Does anyone have photos of their battery in the boot?
Where did you put it and how did you make it secure?
thanks smile

That Daddy

19,464 posts

252 months

Tuesday 20th January 2009
quotequote all
Sometimes battery acid attack can look very much like fire damage,that may be what you can see,it attacks plastics with great vigor.

lewis_sharman

Original Poster:

5,958 posts

222 months

Tuesday 20th January 2009
quotequote all
When i get home tonight i will make sure i take a picture of what it looks like at the moment. I know that Spyschim has done the mod already and may have some pictures of his setup.

Another thing to remember is to possibly create some sort of manual boot release that you can get too. With a flat battery stuck in the battery operated boot, you may otherwise be in a bit of a predicament

STEV8E

635 posts

240 months

Tuesday 20th January 2009
quotequote all
Blimey, sounds easier to get a bird with short legs.

My missus is 5', 1" so the battery can stay just where it is.

smile

Al 450

1,390 posts

252 months

Tuesday 20th January 2009
quotequote all
Just bear in mind that the extra wiring resistance of doubling or tripling the distance from battery to starter motor will result in greater current draw when starting the engine. Hence your battery will take more of a beating so make sure it's in tip top condition.

Suppose you will get more weight over the back wheels though.

2 sMoKiN bArReLs

32,044 posts

266 months

Tuesday 20th January 2009
quotequote all
Al 450 said:
Suppose you will get more weight over the back wheels though.
Depends on how heavy the wife is biggrin

lewis_sharman

Original Poster:

5,958 posts

222 months

Tuesday 20th January 2009
quotequote all
The wiring from my battery goes back past the passenger seat to the back anyways though, so i won't be adding any more wire. When talking to Spyschim about his he also said he didnt have to add any wiring to move it to the boot.

And don't ask me about the logic in this, as i don't know :P

S7Paul

2,103 posts

265 months

Tuesday 20th January 2009
quotequote all
Sorry to hijack the thread slightly, but further to my earlier post, this is the wire that melted (the one on the left).



I take That Daddy's point about battery acid, but this is definitely heat, as it was melted well up the loom when I traced it back. Given it's purpose, and that it's not connected to anything under normal circumstances, I don't understand why it would have overheated.

GreenGriff400

386 posts

288 months

Wednesday 21st January 2009
quotequote all
If it has been shorting then Id try and trace it back to the fuse box and disconnect it. Thsi would prevent any future fire risk from this connector.