350i headlight pod motor
350i headlight pod motor
Author
Discussion

askillp

Original Poster:

9 posts

216 months

Monday 19th January 2009
quotequote all
evening
can it be refurbished or where can i get another one from, can only find 'lucas' on it, no codes

Mr Tank

5,799 posts

305 months

Monday 19th January 2009
quotequote all
Hi
There were some on refurbished units on e-bay a little while ago at £70 each.
Andy

Phil Mycock

493 posts

284 months

Tuesday 20th January 2009
quotequote all
There's not much in them that you CAN refurbish! Strip down, polish the commutator, make sure the gear is free to rotate in its bushings and check the electrical bits. An hour, tops.
There's a Powerpoint presentation of a stripdown somewhere on the web that'll show you how little there is to them.

ETA £70 is daylight robbery.

Edited by Phil Mycock on Tuesday 20th January 00:36

CarbonWedge

226 posts

248 months

Tuesday 20th January 2009
quotequote all
Hi,

The link to the presentation on how to strip them is below. It's very useful. I did mine a while back and it turned out to be broken brush assemblies making them intrmittent. I bought new ones from these guys: http://www.s-v-c.co.uk/prod_wipers.html

www.wedgeneering.co.uk/images/Lucas%20Pod%20Motor%...

TVRleigh_BBWR

6,553 posts

243 months

Tuesday 20th January 2009
quotequote all
TV7 motor's work also, you may just need to swap a few parts.

tr7andtvr

73 posts

232 months

Tuesday 20th January 2009
quotequote all
That is great information…

I have two good motors that spin just fine when I hook them up to direct power. But when I plug in all 5 wires in the pod I get nothing. I have power at the pods when wires are individually tested. Electrical is not my strong point, so I am lost…


What are the 5 wires? What does each do? Any help.

SubRosa

271 posts

226 months

Wednesday 21st January 2009
quotequote all
Phil Mycock said:
ETA £70 is daylight robbery.
Damn sight better than the £125+ that Rimmers want for one!