Back to basics...Correct Tyre Pressures
Back to basics...Correct Tyre Pressures
Author
Discussion

northnoble

Original Poster:

362 posts

215 months

Tuesday 20th January 2009
quotequote all
very basic I know, but what are the recommended tyre pressures for a 2002 M12 GTO?

D_G

1,939 posts

238 months

Tuesday 20th January 2009
quotequote all
20PSI Front / 30PSI Rear.

Dave

AMG Merc

11,955 posts

282 months

Tuesday 20th January 2009
quotequote all
With OEM SO3's? 18/27psi

northnoble

Original Poster:

362 posts

215 months

Wednesday 21st January 2009
quotequote all
Thanks for the replies.....had a look in the US manual (ref Nobleparts) and could not believe 18 psi at the front......my front and rears are both at 25 psi so will adjust and see what difference it makes.

Many thanks,

ThatPhilBrettGuy

11,810 posts

269 months

Wednesday 21st January 2009
quotequote all
northnoble said:
Thanks for the replies.....had a look in the US manual (ref Nobleparts) and could not believe 18 psi at the front......my front and rears are both at 25 psi so will adjust and see what difference it makes.

Many thanks,
You're not going to believe the amount of front end grip you're going to get!

RobP

2,097 posts

270 months

Wednesday 21st January 2009
quotequote all
25psi at the front! Nice cheap power-steering.

northnoble

Original Poster:

362 posts

215 months

Wednesday 21st January 2009
quotequote all
Joys of buying a car from a garage that knows nothing about setting up a Noble that hasn't been used for a long time!! Looking forward to feeling the difference!!!

ThatPhilBrettGuy

11,810 posts

269 months

Wednesday 21st January 2009
quotequote all
northnoble said:
Joys of buying a car from a garage that knows nothing about setting up a Noble that hasn't been used for a long time!! Looking forward to feeling the difference!!!
Don't got spinning backwards into a ditch now that you've got used to the understear smile

northnoble

Original Poster:

362 posts

215 months

Wednesday 21st January 2009
quotequote all
Too much snow and ice about at the moment !!!

mr-manners

185 posts

214 months

Wednesday 21st January 2009
quotequote all
Does that go for other breeds of tyre?

just had eagle f1 assymetrics fitted and while i havnt checked the pressure it does feel a bit hard bounce

jimbooo

334 posts

216 months

Wednesday 21st January 2009
quotequote all
i have a 2002 m12 gto 2.5l same as you. I drive it every day with eagle f1s at 18/27 and it handles perfectly. With more in the fronts i get understeer as mentioned before. Thats just me though but i would give it a try if i were you.

northnoble

Original Poster:

362 posts

215 months

Wednesday 21st January 2009
quotequote all
Will change it this weekend......still need to get my head around the low pressure though - last car (Scooby STi) ran on nearer 30 !!

sean_goodman

536 posts

232 months

Thursday 22nd January 2009
quotequote all
northnoble said:
Will change it this weekend......still need to get my head around the low pressure though - last car (Scooby STi) ran on nearer 30 !!
where is all the weight of the car? engine in back etc

northnoble

Original Poster:

362 posts

215 months

Thursday 22nd January 2009
quotequote all
D'oh....sounds so simple !! Thanks

cliodejaniero

22 posts

212 months

Friday 23rd January 2009
quotequote all
What are the Eagles like for wear on the Noble?? What is the general view on tyres for the Noble as i have had an enquiry regarding tyres for this vehicle?

Cheers

Stephen MacDonald

Sales Executive


Edited by Big Al. on Friday 23 January 13:52

northnoble

Original Poster:

362 posts

215 months

Monday 26th January 2009
quotequote all
Pressures now where they should be!! (18/27) what a difference!! Also much better over bumps....don't feel back getting jarred quite so much !! Thanks all....Only problem now - front grounded coming out of the drive !!!!

AMG Merc

11,955 posts

282 months

Monday 26th January 2009
quotequote all
northnoble said:
Only problem now - front grounded coming out of the drive !!!!
I used emery paper to file it off to the required depth for crossover - if more if necessary then an angle grinder but be careful! wink

northnoble

Original Poster:

362 posts

215 months

Tuesday 27th January 2009
quotequote all
Have looked into a new (smaller) front splitter - only one I can find is from Noblemods....but they haven't answered any of my emails....any other suggestions??