Rear roll bar drop link bracket split
Rear roll bar drop link bracket split
Author
Discussion

Toma500

Original Poster:

1,249 posts

284 months

Wednesday 21st January 2009
quotequote all
Has anyone had this problem of their brackets on the wishbone that the drop links attach to splitting on the rear wishbones. Can you buy the brackets seperate to the wishbones ?or will i have to fabricate new ones . Or god forbid buy new wishbones .The metal on these brackets that are welded to the wishbones are not all that thick 3mm or so and they have split right where the drop link bolts on . Any help or advice much appreciated Tom .

V8 Animal

6,015 posts

241 months

Wednesday 21st January 2009
quotequote all
http://www.pistonheads.co.uk/gassing/topic.asp?h=0... ARB
Take a read of this it should help you.
V8 Animal

GreenV8S

31,027 posts

315 months

Wednesday 21st January 2009
quotequote all
It sto be a common failure. There are probably lots of sources for replacements, but I remember seeing some pictures recently showing much stronger brackets supplied by (I think) Adrian Venn. The scheme would be that you cut off the old brackets and weld these new ones on - always assuming that the wishbones themeslves are still sound and that you have a decent welder you can trust not to burn through them.

Toma500

Original Poster:

1,249 posts

284 months

Wednesday 21st January 2009
quotequote all
V8 Animal said:
http://www.pistonheads.co.uk/gassing/topic.asp?h=0... ARB
Take a read of this it should help you.
V8 Animal
Many thanks tom.