Hazard Lights Stopped Working!!

[dalecrx]

Hi

Well, my hazard lights have stopped working, i havent had to use them yet but i should get them fixed!!

I have checked the following so far:

The switch works fine!! theres voltage getting to the switch!!
Fuse is fine!!

Not sure what to check for next?

where abouts is the relay located?

it stopped working when i fitted my stereo in.

Any ideas?

Cheers

Dale

[RCA]

Take the stereo back out and check the wires at the back of the switch, You might have pulled one by mistake. Did you have to just plug the stereo in or did you have to manually connect the wires for the stereo???

[dalecrx]

I had to manually connect the wires!!

I have checked the wires going to the switch! got 12 volts going to the switch and ground wire ok!!

[ribol]

If the indicators still work then the relay must be ok, it uses the same one for indicators and hazards.

How many wires are there on the back of the hazard switch plug, is it five?

Ivan