Air Filter.
Air Filter.
Author
Discussion

Athlon

Original Poster:

5,953 posts

237 months

Thursday 22nd January 2009
quotequote all
It appears the air filter is a pipercross element, where is the best place to purchase one please? or does anyone know the pipercross number as one of my contacts is a pipercross agent but I doubt they will list TVR in the catalogue. It looks a generic unit to me?

Thanks in advance as always smile

T_Pot

2,542 posts

228 months

Athlon

Original Poster:

5,953 posts

237 months

Thursday 22nd January 2009
quotequote all
Ta, I will watch that, still interested to know if anyone has the Pipercross part number though!

golfer_Johny

26 posts

225 months

Friday 23rd January 2009
quotequote all
Try looking at powerstores.co.uk
They are on there for 19 pounds with a part number E0046

wheels1

209 posts

219 months

Friday 23rd January 2009
quotequote all
I bought one of the E-bay ones for my V8s. fitted ok but was shorter than the one that came off the car. [ much cleaner though]!

daz the plumber

14,997 posts

262 months

Friday 23rd January 2009
quotequote all
i thought the k&n was the way to go ,dont seem to get so dirty .

That Daddy

19,464 posts

252 months

Saturday 24th January 2009
quotequote all
daz the plumber said:
i thought the k&n was the way to go ,dont seem to get so dirty .
No,just lets smaller particles in,the oil they supply to impregnate the cotton gauze is all but dried up after a couple of thousand miles so the dust just creeps thru the cotton gauze,came to this conclusion years ago when tuning Ford motors with downdraught and sidedraught Webers and lifting the tops of the air cleaners after a few months of use you could feel the gritty paste that had accumulated from the dust and fuel stand off in the lids and mounting base plates(road use)never looked back after using correctly oiled PiperX units even though the K&N looks nicer,im sticking with the stock PiperX flows more air than this motor can consume anyway just make sure its cleaned once a year or just replace every its not like they are expensive,an often neglected part on the TVR.

Edited by That Daddy on Saturday 24th January 11:19

spend

12,581 posts

282 months

Saturday 24th January 2009
quotequote all
Both filters require cleaning & oiling regularly, so that they remain serviceable. The K&N has a much greater filtration area due to folds compared to the cylindrical PiperX (does have end feed though). The PiperX does clog too easily for my liking wink

Max flow is probably not reached in many of our cars, but the pressure differential may marginally affect cylinder filling. As you will all accept that a clear filter works better than a clogged filter... A filter that allows air to pass with a minimal pressure drop will certainly allow the engine to breathe better. You pays your money and makes your choice, air filters have different aims - pure filtration or performance - and generally you will pick the one to suit your preference wink

I've seen significant improvements when induction and filtration are bypassed on our cars (RR tests) so it is quite an important area to consider IMHO.

OP: just give Mike Virgo a call he sells the PiperX and I'm sure if you ask nicely will tell you the numbers. (tvrsupplies or something IIRC - oh just pm PHer 'TheAJPGriff')