chassis photo, what do you think about it ?
chassis photo, what do you think about it ?
Author
Discussion

brittanytvr

Original Poster:

191 posts

270 months

Thursday 22nd January 2009
quotequote all
just received some pics, a car that has not been use in the last 2 years or some hundred miles only, what do you think about the chassis, it has been waxoiled at some stage but if you can help!
thanks







Apache

39,731 posts

315 months

Thursday 22nd January 2009
quotequote all
looks pretty good from the pics,

V8 Animal

6,015 posts

241 months

Thursday 22nd January 2009
quotequote all
Excellent condition as far as i can see one of the better ones.

pwd95

8,459 posts

269 months

Thursday 22nd January 2009
quotequote all
The spine looks pretty good but I'll put money on those outriggers being rotten. scratchchin

900T-R

20,406 posts

288 months

Thursday 22nd January 2009
quotequote all
I agree - looks like a good'un to me from the pics. smile

900T-R

20,406 posts

288 months

Thursday 22nd January 2009
quotequote all
pwd95 said:
The spine looks pretty good but I'll put money on those outriggers being rotten. scratchchin
Why?

Cider Andy

1,889 posts

256 months

Thursday 22nd January 2009
quotequote all
Bonsoir Christophe le breizh, la voiture est très bonne, sans doute!

It's impossible to tell the true state of the chassis without seeing all of it (by separating it from the body), but from what you can see it looks good.

Of interest to others wondering where certain parts of the car are that often get a mention, the first photo shows the location of the fuel pump. Photo 3 shows the access hatch to the bellhousing (rubber bung missing), the troublesome 100A fuse, the clutch slave cylinder and that the car has been grounded (not unusual) judging by the grazing on the exhaust pipe and the part of the sump adjacent the drain plug.

bobfather

11,197 posts

286 months

Thursday 22nd January 2009
quotequote all
If you're intending to keep the car then it is time to work is on the outriggers. There are signs of rot under the coating where the centre tube meets the outrigger. In my experience this indicates that there will be a lot of flaking in the area just above the body mounting plates. At this time I would say you only need to clean the area fully with tooth brushes and other soft devices then get lots of waxoyl in there. You should also remove any road muck from the outrigger tops at the wheel arches and then waxoyl the outrigger tops. Repeat annually and that should buy you many years extra chassis life.

brittanytvr

Original Poster:

191 posts

270 months

Thursday 22nd January 2009
quotequote all
thanks all,
I have not seen the car but the chassis could be good with a treatment now( brush, hamerite and waxoiled).
For the sump little damage perhaps some big stones.
Merci pour les détails comme le fusible, pompe essence etc
Thanks for the détails like the fuse, pump etc

wheels1

209 posts

219 months

Friday 23rd January 2009
quotequote all
I notice from the pic's there is not photo of the outriggers behind the front wheels, [near the cill], as these are usually the worst, i would wonder why. Generally from what i car see it looks pretty good and at least they have used the right waxoyl and not the black sticky stuff.

By the way Andy, are you sure there be a rubber cover over the gear box housing? I do not have one either? I have had other cars without one to! just like to know if i should be getting one.

CLN1

657 posts

256 months

Friday 23rd January 2009
quotequote all
When I bought my Griff it didn't have one. Got one from one of the parts places.

Colin.

brittanytvr

Original Poster:

191 posts

270 months

Friday 23rd January 2009
quotequote all
another view with some rust on the outrigger!!surface rust??

bobfather

11,197 posts

286 months

Friday 23rd January 2009
quotequote all
That photo confirms my comments above. It is possible to view the outrigger tops by removing the road wheels to make room for your head. It's worth doing as that's where you'll find the answer to the chassis condition.

It's worth noting the flaking on the drop link hanger. This is the normal state for flat section and definitely worth spending time removing the flake, rust proofing and coating. Not as important as the chassis as these parts are relatively easy to remove and replace but still worth some work to lengthen their life.

brittanytvr

Original Poster:

191 posts

270 months

Friday 23rd January 2009
quotequote all
in fact it is a car I am interested in buying, but perhaps need a visit before paying and remove the wheels to see the condition!
thanks

wheels1

209 posts

219 months

Friday 23rd January 2009
quotequote all
See if they will send you a pic of the front outriggers nearest to the front wheel, i am not sure if you are aware that the pic you have just posted is of the rears?

When you go and look, if poss. try to get it put on a ramp so you can get a good look, and take a screwdriver with you so you can have a good poke at the outriggers. If you find any sign of a hole underneath it will be much worse on top. If this is the case do be put off too much as it can be fixed, just make sure your offer reflects this.
By the way how old is the car and what mileage? I would guess around 30,000 miles, going on the condition of my outriggers.

brittanytvr

Original Poster:

191 posts

270 months

Friday 23rd January 2009
quotequote all
yes it is a 35k 97 chim!Is it similar to your car?
not sure if the seller can send another pic, these ones has been done at the same time as the MOT!
chris

Zippee

14,155 posts

265 months

Friday 23rd January 2009
quotequote all
Chassis looks good to me. Light surface rust which I'd spend some time getting stripped and painted but from what I can see in the pics it looks solid overall. Just make sure you get in there and don't feel scared to poke around with a screwdriver or scrape away the surface rust to see just how deep it is.

pwd95

8,459 posts

269 months

Friday 23rd January 2009
quotequote all
Take a wood chisel with you & have a good old scrape at the corners with the front edge of the chisel. You'll be amazed what you'll uncover. I'm not saying don't buy it, just be prepaired to have bits replaced as & when. Mine's probably a bit worst than that but I'll probably get the drivers side replaced this year & go from there. The rest of the chassis looks great & if it's a good healthy car go for it. I don't think you'll get anything significantly better than that TBH. thumbup

bobfather

11,197 posts

286 months

Friday 23rd January 2009
quotequote all
All this talk of sharp metal tools. I'm sure they would reveal the extent of the flaking but this is someone's car. I expect the owner would object to it being chiselled at, I would, a chisel will remove healthy coating along with the flaky coating.

pwd95

8,459 posts

269 months

Friday 23rd January 2009
quotequote all
With a hammer it would, but by hand it only removes the stuff that needs to come away. yes Used it on all my Tiv's. As soon as you hit the good stuff it's fine. Very honest tool by hand. scratchchin...biggrin