Dash switches...
Dash switches...
Author
Discussion

pies

Original Poster:

13,116 posts

279 months

Saturday 25th October 2003
quotequote all
....for an S3 onwards,are they of a TR7 or sierra

cheers

HarryW

15,827 posts

292 months

Saturday 25th October 2003
quotequote all
Not sure , but they all pretty much have their Lucas part numbers on the back, aren't they off a wedge anyway
Why whcih one you after

Harry

pies

Original Poster:

13,116 posts

279 months

Saturday 25th October 2003
quotequote all
Looking to tidy the whole panel up,not tempted to pull the tunnel cover out again until i do the replacing cos its the biggest birds nest there

HarryW

15,827 posts

292 months

Saturday 25th October 2003
quotequote all
Have the TVR part numbers if that will help, don't know what premium they'd want for the bits though.

Fan switch - O25M 013A, although I have posted the lucas part no before if you do a search.
Rear Fog switch - O25M 010A
Front lamp Switch - O25M 010A (Driving lights)
Mirror Joystick switch - O25M 186A
Mirror change over switch - S29M 10106

The symbols/legends come seperately

Fan symbol - S29M 10095
Fog symbol - O25M 094A
Driving light symbol - O25M 267A

Two favours if you do do this ,
1. If you find a way of illuminating the switch symbols better than the existing Fibre Optic one let me know .
2. This one is more of a tip than a favour, the three position fan switch gives two speeds to the fan as well as off . Apparently if you go up the back when the centre panel is off you can change the wires over on the fan to give higher speeds. The thinking behind this is that the fan is actually a three speed unit and the wires from the switch just use speeds 1 & 2, I've been told that speeds 2 & 3 are the ones to have .

Harry

Podie

46,647 posts

298 months

Sunday 26th October 2003
quotequote all
HarryW said:

1. If you find a way of illuminating the switch symbols better than the existing Fibre Optic one let me know .


Replace the bulb in the fibre optic bit, with an LED one...

HarryW

15,827 posts

292 months

Sunday 26th October 2003
quotequote all
Podie said:

HarryW said:

1. If you find a way of illuminating the switch symbols better than the existing Fibre Optic one let me know .



Replace the bulb in the fibre optic bit, with an LED one...

How'd you'd do that then , bulb is standard bayonet fitting, is there a LED type that'll fit, without choping the wires .

Harry

Pies

Original Poster:

13,116 posts

279 months

Sunday 30th November 2003
quotequote all
Fixed the fan switch tha wasn't working,mine was wired totally different to what Harry said.

on the back of the fan switch the following is written

Lucas uk .........182SA

33939A.............1991

Pies

Original Poster:

13,116 posts

279 months

Sunday 30th November 2003
quotequote all
Driving light switch has the following written on the back

Lucas uk...........182SA

33931...A..2391



And as expected the rear fog is the same