Damp Distributor / HT leads - Help!!!
Discussion
It appears that my chim is suffering from damp, every time I go to start it, it wont unless I leave it in the sun for a while! This is a problem that is only occurring during these cold months. I have come to the conclusion that it is an electrical fault caused by moisture or dampness of the distributor or solenoid. I had this on a previous vehicle and solved it by using a plastic bag to protect the electrics from the elements - I fear given the heat that is produced, this method will just melt!
Anyone had similar problems, how can I help it!??
Anyone had similar problems, how can I help it!??
May be worth replacing the distributor cap and rotor arm.
You may have a hairline crack which is causing the spark to track around the wall of the dissy rather than out of the post to the HT lead.
Might also be worth a new set of HT leads while your at it, these can break down over time with the high engine bay temperatures.
Hope this helps.
Paul.
You may have a hairline crack which is causing the spark to track around the wall of the dissy rather than out of the post to the HT lead.
Might also be worth a new set of HT leads while your at it, these can break down over time with the high engine bay temperatures.
Hope this helps.
Paul.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



