multi-fuel stove with power flue...HELP...
multi-fuel stove with power flue...HELP...
Author
Discussion

dundarach

Original Poster:

6,210 posts

257 months

Monday 26th January 2009
quotequote all
To the pistonhead collective...

I live (don't take the pi55) in a 3 story Bovis house with no cimney. It currently has a blanced flue gas fire on the middle floor.

However what we'd like to have is a multi-flue stove in one of the rooms on the bottom floor, is it possible to have one with a chimney venting outside on the ground floor - I guess the smoke might be a problem.

Other than that any suggestions as to nice fires that could be installed in a new house - electric probably.

Thanks in advance if anyone has any suggestions.


tonyvid

9,889 posts

272 months

Monday 26th January 2009
quotequote all
I looked into this and you will need one of those "Ivor the Engine" chimney pipes that go x feet above your roof line - expensive! There was a thread about this a couple of months ago with all the links to building regs etc.

dundarach

Original Poster:

6,210 posts

257 months

Monday 26th January 2009
quotequote all
tonyvid said:
I looked into this and you will need one of those "Ivor the Engine" chimney pipes that go x feet above your roof line - expensive! There was a thread about this a couple of months ago with all the links to building regs etc.
cheers thanks - sorry should have searched - but that's what I thought.

Dr_Rick

1,729 posts

277 months

Monday 26th January 2009
quotequote all
dundarach said:
To the pistonhead collective...

I live (don't take the pi55) in a 3 story Bovis house with no cimney. It currently has a blanced flue gas fire on the middle floor.

However what we'd like to have is a multi-flue stove in one of the rooms on the bottom floor, is it possible to have one with a chimney venting outside on the ground floor - I guess the smoke might be a problem.

Other than that any suggestions as to nice fires that could be installed in a new house - electric probably.

Thanks in advance if anyone has any suggestions.
Have a look here ( http://www.stovesonline.co.uk/stove_building_regul...)

From a quick read it appears that the chimney would have to terminate at roof height (or slightly above). Could you not change to a gas burner that looks like a wood burner? Other than that, you can get electric versions of wood burners.

Dr Rick

tonyvid

9,889 posts

272 months

Monday 26th January 2009
quotequote all
dundarach said:
tonyvid said:
I looked into this and you will need one of those "Ivor the Engine" chimney pipes that go x feet above your roof line - expensive! There was a thread about this a couple of months ago with all the links to building regs etc.
cheers thanks - sorry should have searched - but that's what I thought.
Ta daa

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

The search is pretty pants anyway so may not have shown it up smile

TWSTEEL

1,099 posts

218 months

Monday 26th January 2009
quotequote all
You need something akin to Selkirk Metalbestos Twinwall Flue.
It's a very simple installation.
You can hire a circle cutter to go straight through the wall. The components simply twist and lock together. They fix to the outside wall with simple stainless steel brackets. Fit an inspection TEE End trap on the bottom. Easy to maintain and the whole job can easily be done in under a day once you've got the stove positioned inside the room.

Like this



From somewhere like here

http://www.stoveland.co.uk/lfc/flueandchimney.htm


EFS



Edited by TWSTEEL on Monday 26th January 10:22


Edited by TWSTEEL on Monday 26th January 10:23

silver.fox.2008

820 posts

219 months

Monday 26th January 2009
quotequote all
Is it against regulations to have balanced flues in bedrooms?