Relocating fuel filter
Relocating fuel filter
Author
Discussion

scotty_d

Original Poster:

6,795 posts

225 months

Sunday 1st February 2009
quotequote all


I am thinking about Relocating my fuel filter just wondering if anyone has done this before and if so where, (I have just spent 45 min fighting with it to get it out and that was with the rear wishbones and suspension out ) so I can imagine how fiddly it will be when it’s all built back up.


It looks as it has not been changed in a while and I now know why.

Cheers Scotty

spend

12,581 posts

282 months

Sunday 1st February 2009
quotequote all
Copper slip the fixings, makes it easier in the future.

Proper petrol pipe clips are far better than the statutory worms - as well as not ripping the pipe they also stay closer to the angle of your socket as you tighten them IMHO. Jubilee! :yuk: wink

scotty_d

Original Poster:

6,795 posts

225 months

Sunday 1st February 2009
quotequote all
Just been thinking about it, correct me if I am wrong but the filter is on the outlet side of the pump?

If this is the case is there any reason not to fit it to the inlet side of the pump to stop the pump pumping dirt through it? Will it reduce fuel pressure?

MoreSteam

698 posts

221 months

Sunday 1st February 2009
quotequote all
Its always best to have the filter on the pressure side. This will stop the innards of the pump getting into the system if it disintegrates.

GreenV8S

31,027 posts

315 months

Sunday 1st February 2009
quotequote all
scotty_d said:
Just been thinking about it, correct me if I am wrong but the filter is on the outlet side of the pump?

If this is the case is there any reason not to fit it to the inlet side of the pump to stop the pump pumping dirt through it? Will it reduce fuel pressure?
It is on the outlet, but you must not move it to the inlet side. These injection pumps are very good at 'blowing' but have almost no ability to 'suck' at all - the fuel simply boils, the pump cavitates, nothing happens. You want to keep the restriction on the upstream sied of the tank as little as possible, hence mounting the pump very close to the tank with a large bore hose and with no more than a crude strainer to keep debris out of it.

spend

12,581 posts

282 months

Sunday 1st February 2009
quotequote all
The pump does have an internal filter, not as fine as the external filter & there isn't room to fit one between the pump & tank? I wouldn't relocate the pump - its in a nice cool place by design I guess - and close to the tank to avoid running dry (internal cooling?).

scotty_d

Original Poster:

6,795 posts

225 months

Sunday 1st February 2009
quotequote all
spend said:
The pump does have an internal filter, not as fine as the external filter & there isn't room to fit one between the pump & tank? I wouldn't relocate the pump - its in a nice cool place by design I guess - and close to the tank to avoid running dry (internal cooling?).
It does make sense i knew they would not put it there just to make it a pain in the backside.

How often should the filter be changed is it every 12k?