Jordan R alloys?
Discussion
STE VR said:
Check my profile for a pic(not the best pic in the world). I have 17x7j all round with 215/45/17 front and 235/45/17 rear. Before anybody yells I know the rears are pushing it on only a 7j but they feel fine and I can't afford to change to an 8j just yet.
Steve
That looks great, lovely car. Which brand of tyres are you using and are there any problems with the wheelarches etc?Steve
T.
MrPhotographer said:
Ive seen these alloys on a chimaera and really like them, was wondering if anyone has them and if so what size they should be on the fronts and rears?
Also any suggestions as to which tyre choice to make?
Thanks
T.
check my profile i have 17 fronts and 18 rears got them from tim (act) supplied with tyresAlso any suggestions as to which tyre choice to make?
Thanks
T.
rigga said:
daz the plumber said:
anything over 225 tyre width you will need 8j
Rubbbish...... why did the factory 500 griffs come with 245 sectional tyres then? those were on 7.5j rimsEdited by daz the plumber on Monday 2nd February 20:56
This is the same factory that started bolting rear offset 16s on the front when they ran out of 15s, no?
rigga said:
Yes they did bolt rear wheels to the fronts on the last 100 run out cars,but even with the standard 15/16 wheel set up,245 tyres were fitted to the rears...... saying 225 max for a 7.5 rim is still wrong
245,s will go on 7.5" rims but that really is pushing the tyre/rim width ratio to the limit,7.5 are really better suited to the 225 section tyre size 
Ok I seem to be getting some conflicting opinions on the fitting of the Jordans to a Chimaera.
One place is saying that if I want 18" all round the fronts should be ET25 and the rears ET35?
The second place which several people have recommended are saying ET45 all round?
And finally the third place who actually rang and spoke with Team Dynamics suggest 18 x 7.5 ET35.
Can anyone shed any light on this as its all getting pretty confusing and I dont want to spend all that money on some wheels and find out Ive got the wrong ones fitted.
Thanks
T.
One place is saying that if I want 18" all round the fronts should be ET25 and the rears ET35?
The second place which several people have recommended are saying ET45 all round?
And finally the third place who actually rang and spoke with Team Dynamics suggest 18 x 7.5 ET35.
Can anyone shed any light on this as its all getting pretty confusing and I dont want to spend all that money on some wheels and find out Ive got the wrong ones fitted.
Thanks
T.
Edited by MrPhotographer on Thursday 12th February 20:47
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




The tyre fitter had a slightly differing opinion! 