Jacking it up
Jacking it up
Author
Discussion

Chemlock

Original Poster:

23 posts

215 months

Monday 2nd February 2009
quotequote all
I know this is going to sound like the stupidest question ever asked on this forum but here goes.

Where are the jacking points on a Chimaera? I'm obviously discounting any rusty bits (joke).

Also I've seen a few picks with what looks like a space saver in the boot but in my manual it states carry a can of tyre gunk in case of flat

Please keep in mind that for the 20 odd years my mind has been devoted to the 1's and 0's that make this sort forum work.

lewis_sharman

5,958 posts

222 months

Monday 2nd February 2009
quotequote all
Jacking up at the corners of the outriggers is fine, but i pad it with some cardboard so that it doesnt take the poweder coating off.

The early cars like mine have a space saver, maybe the later ones have tyreweld?

kenny Chim 4

1,604 posts

289 months

Monday 2nd February 2009
quotequote all
Chemlock, for the front, the jacking point is just behind the wheel. Look and you'll see a triangular plate mating the chassis together. My jack goes under the nut in the middle. On the rear, the jack point is in front of the wheel- same triangular plate.

Though the bulk of Chimaeras (if not all) were sold with a space saver spare, many owners have removed them and carry a tyre inflatant instead.

I prefer to carry a spare and you see them advertised on here quite often. Look in Classifieds under Parts/TVR.

Depending on the age of the car, the mounting point will either be in the offside wing of the boot or to the rear of the fuel tank.