Chassis inspection
Chassis inspection
Author
Discussion

quattrophenia

Original Poster:

1,103 posts

229 months

Thursday 5th February 2009
quotequote all
Hi Guys,

If I was to view a Chim that was being sold by a private seller, what is the best way/place to view the chassis. I know people say take a trolley jack but this is not going to give a very clear or comfortable view.
The only other option is to spend ages sat at the local quickfit blagging my way onto their ramp instead of being out test driving the car.

Where did you view your chassis?

TJC46

2,199 posts

237 months

Thursday 5th February 2009
quotequote all
Hi steve you need to get under the car. Im sure a garage local to where you are viewing/test driving the car would let you put it on there ramps for a bit of cash in hand. If the would be seller is against this idea he must be trying to hide something.Where in the northwest are you? Im in warrington cheshire and im in the middle of a full body off/chassis refurb on my chim. Any help or questions feel free to ask, Tom.

GAVC

163 posts

258 months

Thursday 5th February 2009
quotequote all
Chap drove it up a high kerb on the left, leaving the right wheel on the tarmac, then rolled underneath..... precariously..... to say yeh, the outriggers are fcensoreded.

STEV8E

635 posts

240 months

Thursday 5th February 2009
quotequote all
Steve,
I am under my Chim at the moment cleaning the outriggers, the car is at axle stand height and all the chassis is perfectly visible, see link,(well the underside anyhow!!) you will be fine with jack and one stand, get the wheel off though.

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

dogbucket

1,256 posts

232 months

Friday 6th February 2009
quotequote all
I borrowed the OHs makeup mirror to see the outriggers. My theory was if they are ok then the backbone should be ok as well. In retrospect getting my head into the wheel arch to look at the corners with a torch would have a wise move, but as it turned out they were ok.